ESwitching Basic Switching/Wireless PT Practice SBA

A few things to keep in mind while completing this activity: 1. Do not use the browser Back button or close or reload any exam windows during the exam. 2. Do not close Packet Tracer when you are done. It will close automatically. 3. Click the Submit Assessment button to submit your work.

Introduction
In this practice Packet Tracer Skills Exam, you will:      configure VLANs using VTP configure inter-VLAN routing modify STP configure port security add a wireless LAN

Topology

All contents are Copyright © 1992–2012 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 1 of 4

16. Create.0 255. Step 2: Configure Trunking.43 Fa0/0.16.43. For interfaces FastEthernet 0/19 through FastEthernet 0/24 on all three switches:   Configure static trunking.16.1 Subnet Mask 255.20. All rights reserved.67 Internet WRS Wireless SW_DS1 SW_AC2 SW_AC3 PC1 PC2 PC3 PC4 VLAN 43 VLAN 43 VLAN 43 NIC NIC NIC NIC 172.16.16.255.0 255.16.255.255.20.67.100.0 255.CCNA Exploration LAN Switching and Wireless ESwitching Basic Switching/Wireless PT Practice SBA Addressing Table Device Interface Fa0/0. and address VLAN43 as the management interface on all three switches.16.0 n/a 172.1 172.67.16.10.1 Address 172.255.0 n/a n/a 172.255.255.0 255. VTP domain name: CCNA VTP password: cisco b.1 172. This document is Cisco Public Information.43. enable.255.255.1 172.255.16.43.0 255. Configure SW_DS1 as VTP server and the following VTP parameters:        SW_DS1 is the VTP server. a.16.11 DHCP assigned 255.0 255.10 Fa0/0.255. Note: Packet Tracer now supports the use of the range argument for the interface command.1 172.0 Default Gateway n/a n/a Note: The password for user EXEC mode is cisco.1 172. .1 172.255. Step 3: Configure VTP and VLANs.43.67.20.16.255.1 172.12 172.10.1 172.0 255.100. Create and name the following VLANs on SW_DS1.10 255.255.255.255.16.10.16.43.255.43.1 172.255.10.255.10.255.11 172.16. Assign VLAN 43 as the native VLAN.43.10 172.0 255.255.0 255. The password for privileged EXEC mode is class.16.16.255.1 172.255. VLAN 10: Student VLAN 20: Faculty VLAN 43: Management VLAN 67: Wireless Page 2 of 4 All contents are Copyright © 1992–2012 Cisco Systems.255. Inc.0 255. Step 1: Configure the Switches for Remote Access.10 172. Use the values found in the addressing table.255.16.16.16.1 172.20 Router1 Fa0/0.16.255.13 172.255.

Be sure to designate the native VLAN.   Using a priority of 4096. However. Step 6: Configure Inter-VLAN Routing. Inc. Step 7: Configure Port Security. If this policy is violated. Assign VLANs according to the port assignments table. Verify that VTP is operational. Verify trunking and VLAN assignments. Using a priority of 8192. set SW_AC2 so that it will become the root for all VLANs if SW_DS1 fails. Configure SW_AC3 with port security on FastEthernet 0/2. b.     Enable port security. Configure access ports on access layer switches. b. Note: Best practice requires port security on all access ports. Verify that port security is implemented.   Use the information in the Addressing Table to configure Router1 for inter-VLAN routing. SW_AC3 SW_AC3 Ports Fa0/1 – 0/10 Fa0/11 – 0/17 Fa0/18 Assignment 10 20 67 a. No more than two MAC addresses are allowed on the FastEthernet 0/2 port for SW_AC3. This document is Cisco Public Information. MAC addresses should be automatically added to the running configuration. Verify the spanning tree election. b. Verify inter-VLAN routing. set SW_DS1 as the root bridge for all VLANs.CCNA Exploration LAN Switching and Wireless ESwitching Basic Switching/Wireless PT Practice SBA c. SW_AC3 SW_AC2. Page 3 of 4 . for this practice exercise you will only configure one port with security. a. a. Modify STP root bridge elections. Step 4: Configure Interfaces for VLAN Access VLAN port assignments on each switch are as follows: Device SW_AC2. the port should be automatically disabled. All rights reserved. All contents are Copyright © 1992–2012 Cisco Systems. d.   Configure the appropriate interfaces on SW_AC2 and SW_AC3 for access mode. Configure SW_AC2 and SW_AC3 as VTP clients to participate in the CCNA VTP domain. Once learned. Step 5: Configure Spanning Tree.

PC2 can ping PC3. SW_AC2 can ping Router1. b. Set the router IP and subnet mask. d. Set the SSID to WRS_LAN. Configure WRS. This document is Cisco Public Information. Use the DHCP Server Settings to configure the router to provide wireless hosts with an IP address.10. PC1 can ping PC2.16.    Use static addressing on the Internet interface. The maximum number of users is 25. Configure wireless security.CCNA Exploration LAN Switching and Wireless ESwitching Basic Switching/Wireless PT Practice SBA Step 8: Configure the Wireless LAN. Inc.       SW_DS1 can ping Router1. Refer to the Addressing Table to configure the wireless LAN. Although these are not scored. PC4 can ping PC1. All rights reserved. Page 4 of 4 . Note: It will not be possible for devices to ping PC4 since PC4 is behind the WRS NAT firewall.     c. PC4 uses DHCP to obtain addressing information. Configure PC4 to access the wireless network that is provided by WRS. Step 9: Verify Connectivity. Last Updated: February 2012 All contents are Copyright © 1992–2012 Cisco Systems. Enable WEP security and use 12345ABCDE as key1. the following connectivity tests should be successful. SW_AC3 can ping Router1. Use cisco123 as the remote management password. a. The starting IP address in the wireless LAN subnet is 172.100.