You are on page 1of 4

ESwitching Basic Switching/Wireless PT Practice SBA

A few things to keep in mind while completing this activity:
1. 2. 3. Do not use the browser Back button or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessment button to submit your work.

Introduction
In this practice Packet Tracer Skills Exam, you will:
• • • • • configure VLANs using VTP configure inter-VLAN routing modify STP configure port security add a wireless LAN

Addressing Table
Device Interface Fa0/0.10 Fa0/0.20 Router1 Fa0/0.43 Fa0/0.67 Internet WRS Wireless SW_DS1 SW_AC2 SW_AC3 PC1 PC2 PC3 PC4 VLAN 43 VLAN 43 VLAN 43 NIC NIC NIC NIC 172.16.100.1 172.16.43.11 172.16.43.12 172.16.43.13 172.16.10.10 172.16.20.10 172.16.10.11 DHCP assigned 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 n/a 172.16.43.1 172.16.43.1 172.16.43.1 172.16.10.1 172.16.20.1 172.16.10.1 172.16.100.1 172.16.43.1 172.16.67.1 172.16.67.10 255.255.255.0 255.255.255.0 255.255.255.0 n/a n/a 172.16.67.1 Address 172.16.10.1 172.16.20.1 Subnet Mask 255.255.255.0 255.255.255.0 Default Gateway n/a n/a

Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.

All contents are Copyright © 1992–2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 1 of 4

To configure the switches for remote management access. All contents are Copyright © 1992–2010 Cisco Systems. a. VTP domain name: CCNA VTP password: cisco b. Configure the following on SW_AC2. Inc.CCNA Exploration LAN Switching and Wireless ESwitching Basic Switching/Wireless PT Practice SBA Step 1: Connect the Devices. VLAN 10: Student VLAN 20: Faculty VLAN 43: Management VLAN 67: Wireless Step 2: Configure SW_AC2 and SW_AC3 as VTP clients to participate in the CCNA VTP domain. Note: Packet Tracer now supports the use of the range argument for the interface command. Page 2 of 4 . Step 1: Configure SW_DS1 as VTP server and the following VTP parameters: • • • SW_DS1 is the VTP server. d. The privileged EXEC mode uses the following encrypted password: class Enable Telnet and console line login using the following password: cisco Configure the banner message-of-the-day as Authorized access only! b. This document is Cisco Public Information. Step 3: Configure Trunking. Use the appropriate cable type to make the following connections: • • • • • SW_AC2 FastEthernet 0/1 to PC1 SW_AC2 FastEthernet 0/11 to PC2 SW_AC2 FastEthernet 0/19 to SW_AC3 FastEthernet 0/19 SW_AC2 FastEthernet 0/20 to SW_AC3 FastEthernet 0/20 SW_AC3 FastEthernet 0/18 to WRS Step 2: Configure the Device Basics. Step3: Verify that VTP is operational. Assign VLAN 43 as the native VLAN. For interfaces FastEthernet 0/19 through FastEthernet 0/24 on all three switches: • • Configure static trunking. • • • • The switch name is SW_AC2. Step 4: Configure VTP and VLANs. • • • • c. Create and name the following VLANs on SW_DS1. All rights reserved. a. create and enable interface VLAN 43 on all three switches.

SW_AC3 SW_AC2. Inc. b. b. All contents are Copyright © 1992–2010 Cisco Systems. Note: Best practice requires port security on all access ports. Step 1: Configure access ports on access layer switches. • • • No more than 2 MAC addresses are allowed on the FastEthernet 0/2 port for SW_AC3. Modify STP root bridge elections. Verify that port security is implemented. Step 6: Configure Spanning Tree. Configure SW_AC3 with port security on FastEthernet 0/2. Page 3 of 4 . MAC addresses should be automatically added to the running configuration. SW_AC3 SW_AC3 Ports Fa0/1 – 0/10 Fa0/11 – 0/17 Fa0/18 Assignment 10 20 67 a.CCNA Exploration LAN Switching and Wireless ESwitching Basic Switching/Wireless PT Practice SBA Step 5: Configure Interfaces for VLAN Access VLAN port assignments on each switch are as follows: Device SW_AC2. • • Use the information in the Addressing Table to configure Router1 for inter-VLAN routing. All rights reserved. the port should be automatically disabled. set SW_AC2 as the backup root bridge for all VLANs. Once learned. • • Using a priority of 4096. • • Configure the appropriate interfaces on SW_AC2 and SW_AC3 for static access. Verify inter-VLAN routing. However. Using a priority of 8192. This document is Cisco Public Information. for this practice exercise you will only configure one port with security. Step 7: Configure Inter-VLAN Routing. Assign VLANs according to the port assignments table. If this policy is violated. Verify the spanning tree election. a. Step 8: Configure Port Security. a. set SW_DS1 as the root bridge for all VLANs. b. Step 2: Verify trunking and VLAN assignments.

All rights reserved. Enable WEP security and use 12345ABCDE as key1. Refer to the Addressing Table to configure the wireless LAN. PC4 can ping PC1. • • c. Set the SSID to WRS_LAN. • • • Use static addressing on the Internet interface. • • The first host address is the 10th host address in the Wireless LAN subnet. This document is Cisco Public Information. d. SW_AC3 can ping Router1. the following connectivity tests should be successful. Enable remote management with the password cisco123. Although these are not scored. PC2 can ping PC3. • • • • • • SW_DS1 can ping Router1. Last updated: September 2010 All contents are Copyright © 1992–2010 Cisco Systems. Note: It will not be possible for devices to ping PC4 since PC4 is behind the WRS NAT firewall.CCNA Exploration LAN Switching and Wireless ESwitching Basic Switching/Wireless PT Practice SBA Step 9: Configure the Wireless LAN. Configure PC4 to access the wireless network that is provided by WRS. Set the router IP and subnet mask. Step 10: Verify Connectivity. Configure the router to allow wireless hosts to use DHCP. Configure wireless security. Page 4 of 4 . PC1 can ping PC2. SW_AC2 can ping Router1. Inc. b. a. The maximum number of hosts is 25. Configure WRS. PC4 uses DHCP to obtain addressing information.