You are on page 1of 10

cc  

  .

À    . VTP allows a switch to be configured to belong to more than one VTP domain.1Q standard. 1. Which statement is true when VTP is configured on a switched network that incorporates VLANs? VTP is only compatible with the 802. VTP adds to the complexity of managing a switched network.

What are two features of VTP client mode operation? (Choose two.  À      À   2.) .

What will the effect be on S2? <!--[if !vml]--> <!--[endif]--> S2 will automatically transition to VTP transparent mode.  À can add VLANs of local significance forward broadcasts out all ports with no respect to VLAN information can only pass VLAN management information without adopting changes  À       À   3. An administrator accidentally disconnects the cable from F0/1 on S2. u    À       . Switch S1 is in VTP server mode. Refer to the exhibit. S2 will remove all VLANs from the VLAN database until the cable is reconnected. Switches S2 and S3 are in client mode.

Switch SW1 is configured as a VTP server. 4.     À   S2 will automatically send a VTP request advertisement to 172.11 when the cable is reconnected. switches SW2 and SW4 are configured as VTP clients.17. All switches in the VTP domain are new. Refer to the exhibit. and .99.

Which switch or switches receive VTP updates and synchronize their VLAN configuration based on those updates? <!--[if !vml]--> <!--[endif]--> All switches receive updates and synchronize VLAN information. Only switches SW3 and SW4 receive updates and synchronize VLAN information.switch SW3 is configured in VTP transparent mode. Only switch SW2 receives updates and synchronizes VLAN information. uu .

 .

Transparent mode switches do not forward VTP advertisements. A new VLAN is added to Switch3.    u  À     5. This VLAN does not show up on the other switches. What is the reason for this? VLANs cannot be created on transparent mode switches. À         . The switches in the exhibit are connected with trunks within the same VTP management domain. Refer to the exhibit. Each switch is labeled with its VTP mode.

What will solve the problem? <!--[if !vml]--> <!--[endif]--> Reset the revision number on S2 with either the   À  command or by changing the domain name and then changing it back. After S2 was added to the production network. Refer to the exhibit. S2 was previously used in a lab environment and has been added to the production network in server mode. so the network administrator made no configuration changes to S2 before adding it to the production network. The lab domain has a higher revision number. ^    À  À!. The lab and production networks use the same VTP domain name. 6.À     Server mode switches neither listen to nor forward VTP messages from transparent mode switches. many computers lost network connectivity.

  u !        .

 .

    Change S1 to transparent VTP mode to reclaim all VLANs in vlan.dat and change .

Change S2 to client mode so the VLANs will automatically propagate. 7. back to server mode. V . What does a client mode switch in a VTP management domain do when it receives a summary advertisement with a revision number higher than its current revision number? It suspends forwarding until a subset advertisement update arrives.

  ".

8. It issues summary advertisements to advise other switches of status changes. What causes a VTP configured switch to issue a summary advertisement? . It deletes the VLANs not included in the summary advertisement.  À    It increments the revision number and forwards it to other switches.

.

    A port on the switch has been shutdown. A new host has been attached to a switch in the management domain. . The switch is changed to the transparent mode. Which two statements are true about VTP pruning? (Choose two.) Pruning is enabled by default. 9.

    .

. À  Pruning must be configured on all VTP servers in the domain. VLANs on VTP client-mode switches will not be pruned.

  .

         .

 10.) revision number   pruning mode     . Which three VTP parameters must be identical on all switches to participate in the same VTP domain? (Choose three.

 .

The switch operates in VTP transparent mode. What happens when the new switch SW2 with a default configuration and revision number of 0 is inserted in the existing VTP domain Lab_Network? <!--[if !vml]--> <!--[endif]--> The switch operates as a VTP client.11. The switch operates as a VTP server and deletes the existing VLAN configuration in the domain.    À . All switches in the network participate in the same VTP domain. Refer to the exhibit.

      À .

     The switch operates as a VTP server in the default VTP domain and does not effect the configuration in the existing VTP domain. 12. Switches SW1 and SW2 are interconnected via a trunk link but failed to exchange VLAN information. Refer to the exhibit. The network administrator issued the      .

The switches must be interconnected via an access link. On the basis of the provided command output.  . what could be done to correct the problem? <!--[if !vml]--> <!--[endif]--> Switch SW2 must be configured as a VTP client. command to troubleshoot the problem.

  .

Refer to the exhibit. u !    . 13. Switch1 is not participating in the VTP management process with the other switches that are shown in the exhibit.  À   ]oth switches must be configured with the same VTP revision number. What are two possible explanations for this? (Choose two. Switch2 is in transparent mode.) <!--[if !vml]--> <!--[endif]--> Switch1 is in client mode. Switch2 is in server mode.

Switch1 has end devices that are connected to the ports. u !.

À  !u  .

) <!--[if !vml]--> <!--[endif]--> V         À     À      À         À       This switch shows no configuration revision errors. Refer to the exhibit.À    14. Which two facts can be confirmed by this output? (Choose two. This switch has established two-way communication with the neighboring devices.   .

   À .

Transparent mode switches originate updates about the status of their VLANS and inform other switches about that status. Refer to the exhibit. It verifies the VTP domain is configured to use VTP version 2. Which two statements describe VTP transparent mode operation? (Choose two.) Transparent mode switches can create VLAN management information. What information can be learned from the output provided? <!--[if !vml]--> <!--[endif]--> It verifies the configured VTP password. V À     It verifies the VTP domain name is V1. 15.     À           À            Transparent mode switches can adopt VLAN management changes that are received from other switches. . 16.    À     À   This switch is configured to allows the network manager to maximize bandwidth by restricting traffic to specific network devices.

) u . Which two statements are true about the implementation of VTP? (Choose two.17.

    .

 À     Transparent mode switches cannot be configured with new VLANs. A network administrator is replacing a failed switch with a switch that was previously on the network. 19. What precautionary step should the administrator take on the replacement switch to avoid incorrect VLAN information from propagating through the network? Enable VTP pruning. c À   Change the VTP mode to client. The VTP password is mandatory and case sensitive. What statement describes the default propagation of VLANs on a trunked link? only VLAN 1  À no VLANs the native VLAN 20. How are VTP messages sent between switches in a domain? Layer 2 broadcast  . Switches that use VTP must have the same switch name. Change all the interfaces on the switch to access ports. 18.

  Layer 2 unicast Layer 3 broadcast Layer 3 multicast Layer 3 unicast .

.

.

) ‡ Switch2 is in transparent mode. On the basis of the output provided. The lab and production networks use the same VTP domain name. ‡ Both switches must be configured with the same VTP revision number. Which two statements describe VTP transparent mode operation? (Choose two. ‡ The switches must be configured with the same VTP domain name. The lab domain has a higher revision number. Switches SW1 and SW2 are interconnected via a trunk link but failed to exchange VLAN information. ‡ This switch has established two-way communication with the neighboring devices. ‡ This switch is configured to allows the network manager to maximize bandwidth by restricting traffic to specific network devices.) ‡ If this switch is added to an established network. ‡ This switch shows no configuration revision errors. Refer to the exhibit. ‡ This switch is configured to advertise its VLAN configuration to other VTP-enabled switches in the same VTP domain. the other VTP-enabled switches in the same VTP domain will consider their own ‡ VLAN information to be more recent than the VLAN information advertised by this switch. Refer to the exhibit. what could be done to fix the problem? ‡ The switches must be interconnected via access link. ‡ Both switches must be configured as VTP clients. After Switch2 .×  1. Refer to the exhibit. 2. 5.) ‡ Transparent mode switches can create VLAN management information. Switch1 is not participating in the VTP management process with the other switches shown in the exhibit. ‡ Switch1 is in client mode. What are two possible reasons for this? (Choose two. The network administrator issued the show vtp status command to troubleshoot the problem. 3. so the network administrator made no configuration changes to Switch2 before adding it to the production network. ‡ Switch SW2 must be configured as a VTP client. ‡ Switch1 is in a different management domain. 4. Switch2 was previously used in a lab environment and has been added to the production network in server mode. ‡ Switch1 is using VTP version 1 and Switch2 is using VTP version 2. ‡ Transparent mode switches can adopt VLAN management changes that are received from other switches. ‡ Switch1 has no VLANs. ‡ Transparent mode switches can add VLANs of local significance only. Refer to the exhibit. Which two facts can be confirmed by this output? (Choose two. ‡ Switch2 is in server mode. ‡ Transparent mode switches pass any VLAN management information that they receive to other switches. ‡ Transparent mode switches originate updates about the status of their VLANS and inform other switches about that status.

except VLAN 1. Which two statements describe VTP client mode operation. Refer to the exhibit. ‡ VTP dynamically communicates VLAN additions. What causes a VTP configured switch to issue a summary advertisement? ‡ A new host has been attached to a switch in the management domain. ‡ VTP adds to the complexity of managing a switched network. What is the quickest way to solve the problem? ‡ Reset the revision number on Switch2 with either the delete VTP command or by changing the domain name and then changing it back. but only switch SW4 synchronizes VLAN information. ‡ The advertisement revision number has reached n+1.) ‡ can add VLANs of local significance only ‡ can only adopt VLAN management changes ‡ can create and adopt updated VLAN management information ‡ can only pass VLAN management information without adopting changes ‡ can add VLANs to domain ‡ cannot add VLANs 8 Which statement is true when VTP is configured on a switched network that incorporates VLANs? ‡ VTP is only compatible with the 802. ‡ Change Switch1 to transparent VTP mode to reclaim all VLANs in vlan. 6.1Q standard. ‡ VTP advertisements are passed over access links to other switches. ‡ Only switch SW2 receives updates and synchronizes VLAN information. ‡ A port on a switch in the management domain has changed to blocking mode. 9. manually on Switch1 so that they repropagate throughout the network. ‡ A switch configured for VTP can belong to more than one VTP domain. All switches in the VTP domain are new. and then change back to server mode. Refer to the exhibit. many computers lost network connectivity. ‡ It verifies the VTP domain is configured to use VTP version 2. 7. (Choose two. Which switch or switches receive VTP updates and synchronize their VLAN configuration based on those updates? ‡ All switches receive updates and synchronize VLAN information. 10. Switch SW1 is configured as a VTP server. What information can be learned from the output provided? ‡ It verifies the configured VTP password.was added to the production network.dat. switches SW2 and SW4 are configured as VTP clients. ‡ Only switches SW3 and SW4 receive updates and synchronize VLAN information. and switch SW3 is configured in VTP transparent mode. ‡ A five-minute update timer has elapsed. ‡ SW3 and SW4 receive updates. ‡ Re-enter all appropriate VLANs. . ‡ Change Switch2 to client mode so the VLANs will automatically repopulate. deletions and modifications to all switches in the same VTP domain.

‡ Transparent mode switches do not forward VTP advertisements. ‡ It issues an advertisement request for new VLAN information. ‡ It verifies the VTP domain name is V1. ‡ It increments the revision number and forwards it to other switches. ‡ There are no ports assigned to the new VLAN on the other switches. Refer to the exhibit. All switches in the network participate in the same VTP domain. ‡ It deletes the VLANs not included in the summary advertisement.‡ It verifies VTP advertisements are being exchanged. Each switch is labeled with its VTP mode. ‡ VLANs created on transparent mode switches are not included in VTP advertisements. ‡ Server mode switches neither listen to nor forward VTP messages from transparent mode switches. The switches in the exhibit are connected with trunks within the same VTP management domain. 14. 13. 11. ‡ The switch operates as a VTP server and deletes the existing VLAN configuration in the . ‡ It issues summary advertisements to advise other switches of status changes. Which three VTP parameters must be identical on all switches to participate in the same VTP domain? (Choose three.) ‡ revision number ‡ domain name ‡ pruning ‡ mode ‡ domain password ‡ version number 15. A new VLAN is added to Switch3. ‡ switch operates in VTP transparent mode. What is the reason for this? ‡ VLANs cannot be created on transparent mode switches. ‡ VTP pruning updates all switches within the VTP domain with information about pruning- eligible VLANs. This VLAN does not show up on the other switches. What does a client mode switch in a VTP management domain do when it receives a summary advertisement with a revision number higher than its current revision number? ‡ It suspends forwarding until a subset advertisement update arrives. ‡ VTP pruning updates all switches within the VTP domain with information about pruning- ineligible VLANs. ‡ VTP pruning prevents flooded traffic from crossing trunk links to switches that do not need to process the flood traffic. Refer to the exhibit. What happens when the new switch SW2 with a default configuration and revision number of 0 is inserted in the existing VTP domain Lab Network? ‡ The switch operates as a VTP client. 12. Which statement is true about the VTP pruning process? ‡ VTP pruning automatically updates all switches within the VTP domain with VLAN information.

. An administrator accidentally disconnects the cable from F0/1 on S2. ‡ S2 automatically sends a VTP request advertisement to 172.) ‡ Switches must be connected via trunks. What will the effect be? ‡ S2 loses all VLANs until the cable is reconnected. ‡ S2 does not send a VTP request advertisement unless it is reloaded. ‡ Transparent mode switches cannot be configured with new VLANs. ‡ S2 automatically transitions to VTP transparent mode.17.99. Switches S2 and S3 are in client mode. ‡ The VTP password is mandatory and case sensitive. Switch S1 is in VTP server mode. Which two statements are true about the implementation of VTP? (Choose two. ‡ The VTP domain name is case sensitive. but does not impact the existing VLAN configuration in the domain. ‡ The switch operates as a VTP server. 17. Refer to the exhibit. 16.domain.11 when the cable is reconnected. ‡ Switches that use VTP must have the same switch name.

.