You are on page 1of 76

SKF condition monitoring tools

,
technologies and training
The foundation for effective
condition-based maintenance

Contents

The SKF brand now stands for more
than ever before, and means more A Product information C Product data
to you as a valued customer.
3 Fewer bearing replacements and less 32 Designations and housing data –
While SKF maintains its leadership as a maintenance general
high-quality bearing manufacturer 3 Plummer block housings have much 32 Designations
throughout the world, new dimensions to offer 32 Load carrying ability
in technical advances, product support 3 SNL 30, SNL 31 and SNL 32 plummer
and services have evolved SKF into a block housings have more to offer 38 Product tables
truly solutions-oriented supplier, 4 One basic design – many variants 38 Large SNL plummer block housings
creating greater value for customers. 6 Designed for easy installation and for bearings on an adapter sleeve,
superior performance metric shafts
These solutions enable customers to 8 Superior performance in all sectors 58 Large SNL plummer block housings
improve productivity, not only with for bearings on an adapter sleeve,
breakthrough application-specific prod- inch shafts
ucts, but also through leading-edge
design simulation tools and consultancy B Recommendations 86 Large SNL plummer block housings for
bearings with a cylindrical bore
services, plant asset efficiency mainte- 10 Bearing arrangement design
nance programmes, and the industry’s
10 Bearings on adapter sleeves on straight
most advanced
supply management techniques.
shafts
11 Bearings on cylindrical seats on stepped
D Additional information
shafts 104 Other products for trouble-free
The SKF brand still stands for the very
12 Standard seals operation
best in rolling bearings, but it now
stands for much more. 14 Special seals 104 Robust, high-performance standard
17 End covers bearings
SKF – the knowledge engineering 17 Locating rings 105 For easy mounting – adapter and
company withdrawal sleeves
18 Application advice for trouble-free 106 Other products
operation 107 Other bearing housings
20 Lubrication 108 Condition monitoring equipment
23 Mounting
26 Mounting SNL 30, SNL 31 and SNL 32 110 SKF – the knowledge engineering
housings with labyrinth seals company
28 Mounting SNL 30, SNL 31 and SNL 32
housings with taconite seals
30 Mounting SNL 30 and SNL 31 housings
with oil seals

2

Table of contents

Handheld monitoring 5

Portable data collectors 29
and analyzers

Fault detection
39
and sensors

Cables 57
and enclosures

Training 65
00

Fault detection and sensors Cables and enclosures SKF offers a number of early fault The SKF condition monitoring product detection systems and sensors that assortment also includes a wide range enable users to monitor machinery. vibration transmitters. innovations that have made it easier to and with confidence – they can optimize collect. critical to the success of their maintenance As a pioneer in the condition monitoring strategy. Basic kits are available. you can use The family of SKF Microlog Analyzers these handheld tools to spot-check critical machines and sets the industry standard for functionality and ease of establish trends which enable you to identify problems use. use and share machine Handheld monitoring Portable data collectors and analyzers SKF basic condition monitoring tools SKF puts the power of knowledge offer an easy way to begin using engineering into your hands with a machine data to improve your overall range of portable tools for measuring equipment effectiveness.Around the world. All tools are supported by SKF condition monitoring early on. With the right machine data – industry. SKF has led the way with and the tools to interpret this data quickly. product training. of cables. to junction boxes manufactured a full range of robust industrial accelerometers and with coatings to suit specific operating conditions. investment and training. as well as Eddy Probe Systems. successful condition monitoring programs begin with SKF Industrial operations everywhere maintenance for both productivity and acknowledge that condition monitoring is long-term protection of their assets. analyze. 2 . in mining. SKF has the components necessary for proper installation SKF Copperhead fault detection systems monitor machinery and integration of virtually any system. to identify problems From cables of various lengths and before breakdowns occur. SKF provides styles. combining popular tools software. With minimal and assessing machine condition data. junction boxes and enclosures. product support plans. as well as SmartStart in one convenient package. and cement industries. on-site or remotely. mineral processing.

Training Through the Reliability Maintenance Institute (RMI) and RMI On-Line. 3 . or you are taking it to the next level. and optimize manpower resources. Training ranges from hands-on introductory level courses designed to familiarize maintenance personnel with basic condition monitoring techniques to advanced courses focusing on asset management optimization. reduce operational costs.condition data. training you’ll need to be successful. technologies and eliminate the risk of unplanned downtime. SKF offers a comprehensive range of training courses to help you eliminate machinery problems and achieve maximum reliability and productivity. By enabling users to migrate Whether your condition monitoring from routine preventive maintenance to program is just getting off the ground condition-based predictive maintenance. SKF condition monitoring solutions help SKF has the tools.

4 .

Handheld monitoring   SKF Machine Condition Advisor CMAS 100-SL 6   SKF Machine Condition Detector Pro IS CMVL 3600-IS-K-01-C 8   SKF MicroVibe P CMVL 3860-ML 10   SKF Infrared Thermometer CMSS 3000-SL 12   SKF Thermal Camera TKTI 10 13   SKF Inspector 400 Ultrasonic Probe CMIN 400-K 14   SKF Electrical Discharge Detector Pen TKED 1 15   SKF Electric Motor Assessment Kit CMAK 200-SL 16   SKF Bearing Assessment Kit CMAK 300-SL 17   SKF Basic Condition Monitoring Kit CMAK 400-ML 18   SKF Energy Monitoring Kit CMAK 450-ML 19   Technical data 21 5 .

compressors. enveloped compares them to pre-programmed acceleration and temperature ISO standards Put SKF knowledge simultaneously • Applies an SKF technique called in your pocket • Quick and easy to set up and use. Handheld monitoring SKF Machine Condition Advisor CMAS 100-SL Machine monitoring. health or bearing damage. the MCA can provide early electric motors. SKF Machine Condition Advisor the MCA can quickly and accurately simultaneously measures vibration signals assess the condition of rotating and temperature to indicate machine equipment throughout your facility. able and accurate measurement results 6 . vibration reading that measures warning of potential problems before gearboxes. • Measures velocity. enveloped acceleration and Although small enough to fit in your measurements are shown on a compares it to established bearing pocket. the MCA makes it easy to Features Multiple measurements implement basic maintenance practices without extensive training. made simple Designed to help simplify machine maintenance and prevent costly failures. pumps. it fits neatly at the and unparalleled knowledge of rotating belt line in a pocket or a tool kit machine reliability. the handheld SKF Machine Condition Advisor (MCA) puts the benefits of machine monitoring within reach for any maintenance and operations team. machine monitoring experience uncharacteristic heat ically designed. • Free on-line training is available damage The technology behind the MCA at SKF @ptitude Exchange • Measures temperature using leverages decades of SKF machine an infrared sensor to indicate • Lightweight. See Ordering details. Suitable • Can be used on most industrial from one device for a wide range of industrial rotating machine applications including • Provides an overall velocity machinery. • Exceptionally durable. By measuring machine vibration and temperature at the same time. fans and more vibration signals and automatically failures occur. user-friendly features. the unit is • Avoid costly failures rated IP 54 for use in industrial • Plan maintenance environments • Reduce maintenance costs • Alert and Danger prompts provide • Improve machine reliability increased diagnostic confidence • Ideal for both expert and • Rechargeable unit operates 10 hours novice users on a single charge • Flexible enough to work with standard 100 mV/g constant current accelerometers. Ideal for novice and expert users alike. An optional external sensor can be used for hard-to- Available in SKF assessment and reach locations and for more repeat- monitoring kits. the Machine Condition Advisor bright display viewable in low light vibration guidelines to indicate delivers powerful signal processing to direct sunlight conformity or potential bearing and advanced. compact and ergonom- design.

Description CMAC 105 Extension sensor kit. See page 17 for details. 90 to 264 VAC.Quick and easy – first time Accessories and every time Extension sensor kit CMAC 105 1.5 in. CMAS 100-SL  KF Machine Condition Advisor unit. When the readings stabilize. magnet base. link to SKF @ptitude Exchange for training.) pull-strength Connection cable CMAC 102 Belt holster CMAC 107 Kits that include the SKF Machine Condition Advisor. cable 101.67 mm (0. Press the sensor tip against the • Units in metric or English from hard-to-reach places and point to be measured • Velocity in mm/s RMS or IPS for more repeatable and accurate 3. international DC power supply.) diameter. 1. Press “Select” or “Browse” button Depending on the system setting. Accessories MIL-SPEC connector. charger adapter cable. 4. See page 16 for details.5 mm power CMAC 8002 Charger. Connection cable (1.7 mm (0. CMAK 400-ML SKF Basic condition monitoring kit.70 x 26. Read and record the measurement in gE values Alarm display: Enveloped (A) Alert or ISO machine Select Browsa Acceleration Velocity (D) Danger group button button Extension sensor kit CMAC 105 • 100 mV/g Accelerometer –– Small size case 12. 7 . user manual in English.5 kg (10 lbs.5 m) –– Connector to MCA Ordering details • Magnet Order no.). 100 mV/g accelerometer with 1. Order no.) pull-strength. CMAK 450-ML SKF Energy monitoring kit.5 m with M8 socket type connector for standard ICP 100 mV/g C accelerometer (ICP: integrated circuit piezoelectric) Replacement parts Order no. Description –– 4. CMAS 100-SL Designation Description CMAK 200-SL SKF Electric motor assessment kit.5 m) CMAC 107 SKF Machine Condition Advisor trend worksheet (Excel file) Optional connection cable for standard ICP accelerometers with 100 mV/g. and CD containing: User manual PDF files in English and Spanish. 19 mm (0. +5 V. The extension sensor kit contains an to turn the SKF Machine Condition the front-panel LCD simultaneously accelerometer with integral cable and Advisor on displays: items needed to take measurements 2.6 mm (4 in. 1 600 mA.5 m integral cable and magnet CMAC 107  onnection cable.) diameter supply).75 in.75 in. See page 19 for details. derived Peak measurement results.) and footprint 12. Description CMAC 101 Charger adapter.05 in. press the “Select” button to hold • Temperature in Celsius or Fahrenheit the reading • Acceleration enveloping readings 4. including: Belt holster.32 Hz to 10 kHz (±3 dB) –– Each accelerometer is fully Temperature Measurement Enveloped Battery enclosed in a potted and status Acceleration class indicator (60% full) waterproof stainless steel case LCD display in measurement mode • Integral cable (1. charger (international DC power S 19 mm (0.) –– Frequency range 0. See page 18 for details. CMAK 300-SL SKF Bearing assessment kit. connector to 5.5 kg (10 lbs. 47 to 63 Hz CMAC 106 Magnet.5 x 1.

enveloped acceleration. fails. yellow and green LED alarms ATEX and North American hazardous locations approvals. quarter-turn connection which temporarily fastens the probe to a measurement point Go / No Go machine monitoring Vibration monitoring and Temperature The sensor of the MCD affixes enveloped acceleration Temperature measurements enhance to a machine point via an SKF Velocity vibration identifies phenomena the “early warning” benefit of the QuickConnect Stud or magnetic base which are observable in the low to mid MCD by offering a useful indication for automatic collection of vibration frequency range. 8 . and red LEDs unbalance. friction causes its temperature of machine status. • Multi-parameter measurements. structural problems as misalignment. Green. for quick Go/No Go indication of equipment status for enhanced user confidence • QuickConnect mechanical/comput- erized studs for fast. can analysis on a particular machine. enveloped acceleration. and temperature monitoring with general alarm capabilities and has ATEX and North American hazardous locations approvals. and indicates such of mechanical condition or the load and temperature data. mechanical looseness. maintenance personnel can quickly in the higher frequency ranges such identify the need for more in-depth as bearing and gear problems. so operations or Moreover. and temperature monitoring acceleration. events which occur to rise. also be detected by the MCD with its enveloped acceleration capability. The MCD provides for velocity. enveloped ­including vibration velocity. yellow. Handheld monitoring SKF Machine Condition Detector Pro IS CMVL 3600-IS-K-01-C Intrinsically safe automatic collection of vibration and temperature data The SKF Machine Condition Detector Pro IS (MCD) is certified Intrinsically Safe (IS) for use in the hazardous environments typically found in the petrochemical industrial marketplace. The MCD provides for velocity. as a bearing or its lubricant provide easy-to-interpret indications and more. a signal processing technique which focuses on enhancing the repetitious vibration signals that characterize such problems. and temperature with general alarm capabilities and has • Red. because. applied to a specific component.

quarter turn connection which immediate in-depth analysis which temporarily fastens the probe to should be performed. including: SKF QuickConnect S 1/4-28 stud. and the MCD’s alarm Engineered to work exclusively indicator and LED react appropriately. Description CMAC 3620 SKF Machine Condition Detector Pro IS setup key CMAC 3610 Temperature magnet for SKF Machine Condition Detector Pro IS probe CMAC 3630  robe tip replacement kit for temperature magnet for SKF Machine P Condition Detector Pro IS CMAC 3611 Magnetic probe tip for SKF Machine Condition Detector Pro IS 9 .25 kit CMAC 9600-07 Tap for M8 x 1. accurate. padded carrying case. temperature magnet for probe.25 mounting S thread – three (3) studs per package CMSS 2611-3  KF QuickConnect computerized (patent pending) 1/4 x 28 mounting thread S – three (3) studs per package CMAC 9600-01 Tool kit for spot face 1/4-28 CMAC 9600-02 Tool kit for spot face M8 x 1. quick start card QuickConnect and mounting accessories Order no. Description CMVL 3600-IS-K-01-C  KF Machine Condition Detector Pro IS probe.25 kit CMAC 9600-09 End mill or counter bore for either kit Replacement parts Order no. CMCP600 Bearing fault demonstrator Ordering details Order no. user manual. two (2) “AA” Alkaline batteries.General alarm capabilities QuickConnect studs for quality.25 mounting thread- S three (3) studs per package CMSS 2610-3  KF QuickConnect mechanical 1/4-28 mounting thread- S three (3) studs per package CMSS 2601-3  KF QuickConnect computerized (patent pending) M8 x 1. the QuickConnect An “alert” condition is an early mechanical/computerized studs provide warning of impending problems for for a fast. defined settings. which include the Specially designed mechanical and “alert” and “danger” levels for each computerized studs enable users of the three measurements. This reduces the A “danger” alarm indicates that a possibility of errors and inconsistencies problem has escalated to a point where often resulting from data collected by actions must be made quickly to avoid a variety of individuals using varying a serious failure. setup key. The MCD is easily programmed for repeatable data collection six alarm settings. measurement point.25 CMAC 9600-03 Drill bit for 1/4-28 kit CMAC 9600-04 Tap for 1/4-28 kit CMAC 9600-05 Pilot for 1/4-28 kit CMAC 9600-06 Drill bit for M8 x 1. When to collect consistent.25 kit CMAC 9600-08 Pilot for M8 x 1. Description CMSS 2600-3  KF QuickConnect mechanical M8 x 1. a measurement point. they are and repeatable data from each automatically compared to six user. measurements are taken. with the MCD. techniques.

bearing faults. without complexity With the SKF MicroVibe P. and Power without complexity more focused analysis and trending display data in both English or metric Built-in automatic functions virtually • Data management software enables units. while analytical transfer of vibration data to a for analysis and trending using the displays and automatic judgment of computer for trending and analysis data management software. • Quickly identify problems with expert When abnormal noise is detected. rubs. and software condition. and even • Ideal for small route data collection listen to measured vibration signals. 1 000 FFT spec. overall trends. misalignment. and reliable assessment of machine or bearing • Stores and recalls up to 2 000 overall Data management vibration signals. vibration data. Upload data to your computer eliminate setup. Simplified vibration assessment The SKF MicroVibe P collects and displays overall vibration readings and automatically provides expert judgment of the measured velocity and overall enveloped acceleration levels. Audio analysis and spectra can be stored. trums. trended. exported to Microsoft Excel. • Utilizes the two most common vibration sensors-accelerometers and dynamic velocity transducers • Simultaneously collects vibration measurements including acceleration. vibration assessment is as close and convenient as your PDA. velocity. judgment criteria based on ISO the vibration analysis capabilities help vibration severity standard and determine the type and severity of SKF bearing condition evaluation the problem. enabling immediate. displacement. This economical vibration meter expansion module fits in a PocketPC’s compact flash card slot (CF Type II) and features the user- friendly Windows Mobile Operating System. save. Once machine vibration readings help users uploaded. and enveloped acceleration in FFT spectrum and time waveform displays • FFT Spectrum analysis enables user to pinpoint problems like unbalance. accurate. edit. Identify problems and assess machine condition quickly and easily with this versatile and easy-to-use pocket tool. Simply connect the earphones and graphically displayed. Handheld monitoring SKF MicroVibe P CMVL 3860-ML Vibration monitoring and analysis power. and 200 time waveforms for You can extract. identify machine problems on the spot. etc. 10 .

high strength 18 kg (40 lb. and carrying case.) integral cable with plug and stinger.5 m (5 ft. Description CMVL 3860-ML  SKF MicroVibe P Kit. accelerometer. or enveloped acceleration vibration results. Ordering details Order no.5 m (5 ft. CE declaration of confirmation. making it easy to quickly transient capture” feature automatically enveloped acceleration severity criteria identify signals indicative of specific starts data collection when the for accurate evaluation of machine machine problems.) pull CMAC 3830 Earphones CMAC 3835  ertified Pocket PC’s (PDA) with Windows Mobile 2006 – Hewlett Packard C – HP iPAQ 210/211 Note: SKF MicroVibe P also works with Certified Pocket PC’s (PDA) with Windows Mobile 2005 – Hewlett Packard – HP iPAQ hx2490/2495 or iPAQ hx2790 11 . CMVL 3860-ML-PPC  KF MicroVibe P with Pocket PC. 1. A unique “automatic to pre-programmed velocity and spectrum. high strength 40 lb. earphones. data management software CD-ROM and manual.Automatic setup FFT spectrum analysis Time waveform displays and onboard expertise Cursor position readout with display Time waveform displays are The SKF MicroVibe P has automatic zoom optimizes your analysis power. and post-trigger events surrounding a change in machine condition.) integral cable with plug CMSS 3812 Velocity pickup sensor.0 Accessories and Replacement parts Order no.) integral cable with plug CMAC 3825 Two-bar magnetic base. user-specified trigger level. pull. or bearing faults. including: module. velocity. user manual. quick start guide. Compares readings the highest vibration peaks from a measurements. 1. available for acceleration. enabling users to easily determine abnormal more detailed analysis of the pre- conditions and take appropriate action. like misalignment. including: CMVL 3860-ML and Hewlett Packard – S HP iPAQ 210/211 Pocket PC with English operating system Windows Mobile 6. Description CMSS 3811 Accelerometer. it tabulates and displays displacement. setup and extensive evaluation of In addition. measured vibration signal exceeds a vibration levels. Note: Pocket PC (PDA) NOT INCLUDED. 1. rubs.5 m (5 ft. two-bar magnetic base. This helps even novice imbalance.

04 m at When pointed at an object. Note: Under an electromagnetic field of 3 V/m from 90 to 360 MHz the maximum error is ±10 °C 12 . MIN. Ideal for a broad range of “Lock” function Selected maintenance tasks. • High intensity. S one point of the measurement spot two AAA batteries. DIF. dual laser non-contact infrared thermometer Rugged and easy to use – just aim.6 in • Exceptional battery life with low the thermal energy radiated from an at 80 in battery indicator (140+ hours) object with an infrared detector. pull the trigger. long range. Handheld monitoring SKF Infrared Thermometer CMSS 3000-SL Heavy duty.4 in at 120 in 1. Dual lasers provide easy aiming and define the target area. The target Ordering details area is highlighted at all distances with Order no. See Ordering details. in progress reach objects safely without physical Laser function ON/OFF Battery low indicator contact. rotating as the CMAK 400-ML SKF Basic condition monitoring kit.06 m at 2m • Programmable high and low 3m detector collects energy. Order no. 0. white LED flashlight This allows for fast and accurate real- • Heavy duty magnet in base of handle time readings. hard carrying case and magnetic stand on one side of the target area to Available on request  ational Institute of Standards and Technology (NIST) Certificate of N be measured and Laser 2 indicates Calibration Accuracy (Watlow-Gordon XACT-CAL) the location of the diametrically opposed point on the other side of the Kits that include the Infrared Thermometer CMSS 3000-SL measurement spot. dust-proof hard case distance to spot ratio Available in SKF assessment and monitoring kits. closer or further from the target. hazardous. AVG temperature translates as a reading on the backlit displays with “Lock” function for display. and read the temperature in less than a second. the CMAK 300-SL SKF Bearing assessment kit. Focal point continuous temperature scanning the object temperature is continuously • Bright amber. See page 19 for details. or hard-to. At the focal point. SKF Infrared Thermometer is moved CMAK 450-ML SKF Energy monitoring kit. the infrared 0. producing Target area audible alarm a signal that the microprocessor Laser 1 Laser 2 • MAX. See page 18 for details. dots line up vertically. for continuous temperature temperature unit (°C/°F) scanning • Dual point lasers provide easy Surface temperature aiming and define the target area Average Average • Adjustable emissivity for more value accurate measurement of different surface materials • 50:1 Distance to spot size ratio LCD display • Temperature range: –60 to +1 000 °C (–76 to +1 832 °F) • Selectable temperature units (°C or °F) The non-contact thermometer senses 2. moving. Dual laser sighting and • Water resistant. Description two laser dot markers. Laser 1 indicates CMSS 3000-SL  KF Non-contact Infrared Thermometer. including quick start guide. See page 17 for details. Measure surface temperatures of Scanning hot. Distance to spot ratio 50:1. As the trigger is squeezed. Description where the spot size is the smallest. back-light LCD display measured by the infrared detector.

backlit. including removable handle. 31/2 in. lightweight. allowing you to easily interpret and analyze the scene. carrying case. which can be blended. Powerful PC software for analysis and report-writing is supplied as standard. The camera captures both digital and thermal images. up to safely on running equipment • Images can be voice and/or text an. hotspots are rapidly identified. This unique thermal camera requires no special training and by simply pointing at the application. allowing advanced environments scene analysis • Removable handle Ordering details Order no. 1 000 radiometric and visual images • Laser pointer pinpoints the center of notated so that situation details can • Multilingual menus the image area be recorded pertinent to the image • Advanced thermal image processing • Isotherms. European & Australian plugs). temperature gradients. landscape • Blend function allows a mixture of most applications screen with clear sharp image digital and thermal images for easy • High and low temperature resolution interpretation audible and visual alarms are easily • Rechargeable integrated lithium-ion • Non-contact measurement technique set to quickly detect abnormal battery with 6 hour running time allows measurements to be made temperatures • Large image storage capacity. USA. Micro SD card (1GB). Description TKTI 10  KF Thermal Camera. Camera with handle removed CD containing IFU and software.SKF Thermal Camera TKTI 10 Digital camera with extensive thermal imaging capabilities The SKF Thermal Camera TKTI 10 is an extremely user-friendly camera designed especially for use by maintenance technicians to visualize troublesome hotspots quickly and easily. Universal AC adaptor (UK. and Quick Start Guide 13 . enabling you to perform Powerful analysis software comprehensive image analysis and produce professional reports. Moreover the images can be stored and analyzed using the advanced thermal imaging capabilities. USB connection S cable. and report-writing software supplied area analysis and two user-select- able cursors can be displayed on the • IP 54 suitable for industrial camera screen. ergonomic design • Wide temperature measurement • 8 different selectable color pallets • Captures and displays both digital range (in °C and °F) from –10 to for ease of viewing and thermal images 300 °C (14 to 660 °F) suitable for • Bright. • Compact.

and user manual. It machine gunning. gearboxes and more This simple approach to inspection can save time.) bottles. CMAK 450-ML SKF Energy monitoring kit. money. stethoscope module. case of (12) 240 ml (8 oz. • Inspects steam traps for blow-by. Probe senses high frequency sounds including compressed air produced by operating equipment. low battery indicator. and energy and can be a compliment to your condition monitoring program. Ordering details Order no. sors. short wave and condensers nature of ultrasound allows operators to pinpoint problems even in noisy • Detects arcing. so that a user can hear exhaust systems these sounds through a headset and • Locates leaks in fittings. 9-volt alkaline battery. See page 18 for details. boilers meter. Handheld monitoring SKF Inspector 400 Ultrasonic Probe CMIN 400-K Easy detection of high frequency sounds The SKF Inspector 400 Ultrasonic • Detects pressure and vacuum leaks. compres- early stages of machine problems. See Ordering details. rubber focusing probe. pumps. scanning module. valves. motors. lightweight Available in SKF assessment and foam headset. and see them as intensity increments on a flanges in heat exchanger. Valve leakage 14 . monitoring kits. making • Detects leaks in valve seats and them audible. leaks and electrical discharges. Description CMAK 400-ML SKF Basic condition monitoring kit. Description CMIN 400-K  KF Inspector 400 Ultrasonic Probe Stethoscope/Scanner Kit including: Probe pistol S housing with LED bar graph meter. 8-position sensitivity selection. (used for extremely P low level leaks 1 x 10–6 mil/s) CMAC 8600-6 Stainless steel unisonic scanning module CMAC 8600-7 Stainless steel stethoscope/contact module CMAC 8600-8 Stethoscope extension rods CMAC 8600-9 Rubber focusing probe Kits that include the 400 Ultrasonic Probe CMIN 400-K Order no. The high frequency. and corona environments. oversized traps electronically translates these signals and line blockage by a heterodyning process. tracking. Accessories and replacement parts Order no. See page 19 for details. Description CMAC 8600-1 Lightweight foam lined headset CMAC 8600-2 Deluxe noise isolating headphones CMAC 8600-3 Deluxe noise isolating headphones to be worn with hard hat CMAC 8600-4 Utility belt with holster CMAC 8600-5  atented liquid leak amplifier. in electric apparatus The SKF Inspector 400 Ultrasonic • General mechanical inspection of Probe is easy to use and can detect bearings.

30 seconds. Description CMAK 200-SL SKF Electric motor assessment kit. 15 . Ordering details Order no. lubricant degradation and ultimately bearing failure. • Unique remote solution allows operation at a distance from the motors which protects the user from touching machinery in motion • No special training required • Capable of detecting electrical discharges on a time base of 10 Lubricant degradation caused by electrical seconds. Electric motors are more vulnerable to suffer electrical erosion in bearings when controlled by a Variable Frequency Drive.SKF Electrical Discharge Detector Pen TKED 1 Unique. Kit that includes the Electrical Discharge Detector Pen TKED 1 Order no. See page 16 for details. the EDD Pen can help detect bearings more susceptible to failure. a spare antenna. S erosion in bearing carrying case. When incorporated in a predictive maintenance program. Electrical discharges are a result of motor shaft voltages discharging to earth through the bearing. or indefinite discharge currents • LED backlit screen allows use in dark environments • IP 55 (Ingress Protection) rating for protection against dust and water Available in SKF assessment and monitoring kits. reliable and safe way to detect electrical discharges in electric motor bearings The SKF Electrical Discharge Detector Pen (EDD Pen) is a simple to use hand-held instrument for detecting electrical discharges in electric motor bearings. and significantly prevent unplanned machine downtime. causing electrical erosion. and instruction for use. See Ordering details. Description Fluting marks characteristic of electrical TKED 1  KF Electrical Discharge Detector Pen including batteries.

Ordering details Order no. Details shown on page 15. reliability. operations. SKF Electrical Discharge Detector Pen TKED 1 The SKF Electrical Discharge Detector Pen is a simple to use hand-held instrument for safely detecting electrical discharges in electric motor bearings. Handheld monitoring SKF Electric Motor Assessment Kit CMAK 200-SL The SKF Electric Motor Assessment Kit makes the assessment of electric motors a simple task for maintenance. Description CMAK 200-SL  KF Electric Motor Assessment Kit includes: SKF Machine Condition S Advisor and SKF Electrical Discharge Detector Pen 16 . • Inspect and assess electric motor machine condition • Measure velocity. and enveloped acceleration in electric motors and other operating equip- ment • Safely detect electrical discharges in electric motors • Ideal for novice and expert users SKF Machine Condition Advisor CMAS 100-SL The SKF Machine Condition Advisor simultaneously measures machine vibration signals and temperature to indicate machine health and bearing condition. temperature. Details shown on page 6. and vibration analysis departments.

and enveloped acceleration in operating equipment SKF Machine Condition Advisor CMAS 100-SL The SKF Machine Condition Advisor simultaneously measures machine vibration signals and temperature to indicate machine health and bearing condition. To facilitate light.6 kg (5. Description CMAK 300-SL  KF Bearing Assessment Kit includes: SKF Machine Condition Advisor.) case only Note: The SKF OilCheck is not an analytical Dimensions: –– Oxidation instrument.SKF Bearing Assessment Kit CMAK 300-SL The SKF Bearing Assessment Kit makes the assessment of bearing condition a simple task for maintenance. non.) trending Ordering details Order no. SKF OilCheck monitor The SKF OilCheck measures the changes TMEH1 in dielectric constant of an oil. contact instrument for increased mechanical Dielectric change is directly related to long range application.7 lb. with numerical read-out. wear and loss of the degradation and the contamination Details shown on the oil’s lubricating level of the oil and will allow the user page 12.) • Numerical readout to facilitate the comparative readings of a good oil to a used oil of the same type and brand. the instrument is equipped for industrial environments. operations. of oil. Depth 150 mm (6 in.) readouts provide a guide and enable trending of Width 330 mm (13 in. It is an instrument to detect changes • Handheld and user friendly in the oil condition only. and case 17 . properties. • Check bearing and lubrication condition • Inspect and assess overall machine condition • Measure velocity. –– Metallic content Weight: 2. reliability and vibration analysis departments. durable aluminum carrying case –– Fuel contamination trending. to achieve optimized intervals between • Shows changes in oil oil changes and detect increased Convenient carrying case condition effected by: mechanical wear and loss of the oil’s The instruments are packaged in a –– Water content lubricating properties. the SKF OilCheck is able Thermometer is a dual and contamination level to determine the degree of change laser sighted. Details shown on page 6. The visual and numerical Length 450 mm (18 in. temperature. SKF OilCheck. and detects in the condition of the oil. S SKF Infrared Thermometer. By SKF Infrared Thermometer comparing the measurements obtained CMSS 3000-SL The SKF OilCheck from used and new oils of the same The heavy duty Infrared indicates the degradation type and brand.

Description Length 450 mm (18 in. more repeatable Details shown on and electrical and accurate page 12. durable aluminum carrying case for industrial environments. 100 mV/g accelerometer with 1.) Advisor. Extension sensor kit for the SKF SKF Infrared Thermometer SKF Inspector 400 Ultrasonic Machine Condition Advisor CMSS 3000-SL Probe CMIN 400 CMAC 105 The heavy duty SKF Infrared The SKF Inspector 400 Ultrasonic The external vibration sensor with Thermometer is a dual Probe senses magnet provides laser sighted. so operators can pinpoint problems even in Convenient carrying case noisy environments. 18 .7 lb. operations. Details shown on page 6.5 m integral cable and magnet. leaks. and case.) CMAK 400-ML  KF Basic Condition Monitoring Kit includes: SKF Machine Condition S Width 330 mm (13 in. high frequency sound and enveloped acceleration in operating equipment • Ideal for novice and expert users SKF Machine Condition Advisor CMAS 100-SL The SKF Machine Condition Advisor simultaneously measures machine vibration signals and temperature to indicate machine health and bearing condition. • Inspect and assess overall machine condition • Measure vibration. temperature. makes them audible Details shown on page 7. SKF Inspector Depth 150 mm (6 in. SKF Extension sensor kit. discharges and measurements. Weight: 2. high frequency convenience for non-contact instrument sounds produced hard-to-reach for long range by operating surfaces and application.) 400 Ultrasonic Probe. The instruments are packaged in a Details shown on page 14. equipment. reliability and vibration analysis departments. Handheld monitoring SKF Basic Condition Monitoring Kit CMAK 400-ML The SKF Basic Condition Monitoring Kit makes machine health monitoring a simple task for maintenance.) case only Ordering details Dimensions: Order no. SKF Infrared Thermometer. light.6 kg (5.

high frequency sound and enveloped acceleration in operating equipment • Ideal for novice and expert users SKF Machine Condition Advisor SKF Infrared Thermometer Hioki Clamp-On Power Meter CMAS 100-SL CMSS 3000-SL CPT3169-20 The SKF Machine Condition Advisor The heavy duty SKF Infrared Instrument used for obtaining energy simultaneously Thermometer is a dual related measurements for energy measures machine laser sighted. CMAC 105 The SKF Inspector 400 Ultrasonic integrated value. Measures voltage. diagnosis. and temperature long range application. magnet provides high frequency • Measure up to two three-phase. power factor. so operators can • Power recording for individual pinpoint problems even in waveforms noisy environments. and electrical to indicate Details shown on equipment machine health and bearing condition. • Simultaneous recording of demand Details shown on page 14. conservation programs. non.SKF Energy Monitoring Kit CMAK 450-ML For compressed air systems The SKF Energy Monitoring Kit makes it possible for any facility to potentially lower their energy cost and reduce their CO2 emissions by monitoring and optimizing the energy used by their compressed air systems. frequency. reactive Machine Condition Advisor CMIN 400 power. • Facilitate significant energy and cost reductions without major capital expense • Measure energy data and condition monitoring data at the same time • Inspect and assess overall machine condition • Measure vibration. active Extension sensor kit for the SKF Ultrasonic Probe power. surfaces and equipment. SKF Inspector 400 current. vibration signals contact instrument for ISO 14001 testing. PC card data and accurate discharges and storage measurements. Details shown on page 6. page 12. temperature. convenience for sounds produced two-wire systems hard-to-reach by operating • Measure up to four single-phase. makes them audible Details shown on page 7. values and harmonics continued on next page 19 . The external vibration sensor with Probe senses and harmonics. two-wire systems more repeatable and electrical • 5 A to 5 000 A range. leaks. apparent power.

) barrier to protect Depth 178 mm (7 in.) case only • CE approved for input Dimensions: up to 500 A AC Length 660 mm (26 in. Hioki Power Meter Clamps and case. for industrial environments. SKF Inspector 400 Ultrasonic Probe.) • Sensors with a safety Width 330 mm (13 in. 100 mV/g accelerometer with 1. durable aluminum carrying case Hioki Clamp-on Power Meter. S SKF Extension sensor kit. 20 . Description CMAK 450-ML  KF Energy Monitoring Kit includes: SKF Machine Condition Advisor.5 m integral cable and magnet. SKF Infrared Thermometer. Handheld monitoring Hioki Power Meter Clamps Convenient carrying case CPT9661 The instruments are packaged in a Clamp-on sensor for use with the light. Hioki Clamp-on Power Meter. Weight: 4.) the user from direct contact with live con- ductors Ordering details Order no.3 lb.2 kg (9.

50 x 1.) Excitation voltage 18 to 30 V DC Weight (including 1.) from target External sensor power 24 V DC at 3.) Measurements Dimensions Velocity Range: 0. non-condensing Internal Integrated piezoelectric acceleration Enclosure IP 54 External Accepts ICP type 100 mV/g Approvals CE accelerometer Drop test 2 m (6.2 to 50.) 0.2 mV/(m/s2) (100 mV/g) Shock limit 49 km/s2 peak (5 000 g peak) Measurement range ±490 m/s2 (±50 g) Temperature range –54 to +85 °C (–65 to +185 °F) Frequency range (±3 dB) 0./s (equivalent Peak).) Output bias voltage 8 to 12 V DC Sensing element Ceramic/shear Electrical case isolation >108 Ω Case material Stainless steel Electrical protection RFI/ESD Sealing Potted Integral cable 0.6 ft.7 to 65 mm/s (RMS).5 m cable) 70.6 °F) 100 mV/g sensitivity that needs ICP Distance: Short range.4 mm (1.) Frequency: 10 to 1 000 Hz.0 gE Battery life  0 hours before charging again 1 (≈1 000 measurements) Frequency: Band 3 (500 to 10 000 Hz) With external sensor: Temperature Range: –20 to +200 °C (–4 to +392 °F) Up to 55% less battery life Infrared temperature accuracy: Supported external sensor  ny standard accelerometer with A ±2 °C (±3.) meets ISO 10816 Height 25. maximum (Integrated circuit-piezoelectric) 10 cm (4 in.Technical data SKF Machine Condition Advisor (page 6) Designation CMAS 100-SL Designation CMAS 100-SL Vibration pickup Humidity 95% relative humidity. Length 200 mm (7.60 in.2 (mm/s2)/√Hz (4 µg/√Hz) Electrical Mechanical Settling time ≤2 sec Size 12.5 oz.90 in. +105 °C (+221 °F) Wrench flats 7/16 in.) Excitation constant current 2 to 20 mA Mounting thread 1/4-28 UNF-2B Output impedance <150 Ω Mounting torque 2.85 in.05 in. 47 to 60 Hz While charging 0 to +45 °C (32 to +104 °F) Output: 5 V DC regulated Storage temperature 3 to 4 hours for a full charge Less than one month –20 to +45 °C (–4 to +95 °F) More than one month but less than six months: –20 to +35 °C (–4 to +95 °F) SKF Machine Conditioner SKF Machine Conditioner Advisor Accessory 100 mV/g Accelerometer Advisor Accessory 100 mV/g Accelerometer Dynamic performance Environmental Sensitivity (±10 %) 10.) Temperature sensor Internal infrared temperature sensor Weight 125 g (4.5 (mm/s2)/√Hz (8 µg/√Hz) Amplitude linearity ±1% 100 Hz 49. 21 . Width 47 mm (1.04 to 3.70 x 26.00 in.7 to 6.1 (mm/s2)/√Hz (5 µg/√Hz) Transverse sensitivity 7% 1 kHz 39.3 mm2 (22 AWG). meets ISO 2954 Battery capacity 550 mAh Enveloped acceleration Range: 0.5 mA Operating temperature range Charger specifications Universal AC/DC wall plug-in In use –10 to +60 °C (14 to +140 °F) Input: 90 to 264 V AC.32 to 10 kHz Spectral noise Mounted resonant frequency 22 kHz 10 Hz 78.8 Nm (2 to 5 ft./lb.67 mm (0.4 oz.7 g (2.

5 V alkaline “AA” batteries Type Micro D RS 232 Battery lifetime 30 hours QuickConnect interface Backup battery One (1) 3 V BR1225 Lithium ion battery Receptacle 1/4 turn 5/8-24 two (2) lead thread with contact Auto off Two (2) minute countdown on last operation Accessories to fit Hazardous area ratings SKF QuickConnect QuickConnect Stud series – CMSS 26xx Temperature Magnet Intrinsic Safety (IS) 10 cm (4 in) Stinger CMSS 60139-04 ATEX II1G EEx ia IIC T4 (Ta = –20 to +40 °C) Class I. shear type) Drop test Six (6) feet on multiple axes Measurement range Dimensions Velocity 0. Groups A.4 lb.00 in.3 to 55 mm/s (RMS).) with battery.99 x 17.78 mm (2.63 in. shear type Power supply ±5 V DC Voltage sensitivity 20 mV/g Resonance frequency 20 kHz approximate Frequency range 3 to 10 000 Hz Maximum acceleration 500 m/s2 Vibration limit 5 000 m/s2 Maximum output voltage ±1 V Output impedance Below 100 Ω Temperature range –20 to +80 °C (–4 to +176 °F) Material SUS Weight 60 g (2. spray-proof 22 .165 x 0.) with temperature Frequency range magnet probe tip Overall velocity 10 Hz to 1 kHz (Tolerances measured User environment within the frequency range are in Operating temperature accordance with ISO 3945) Ordinary locations –20 to +60 °C (–4 to +140 °F) Enveloped acceleration band 3: 500 Hz to 10 kHz Hazardous locations –20 to +40 °C (–4 to +104 °F) Display Storage temperature –37 to +70 °C (–34 to +158 °F) Viewing area 54.2 mm (1./s) Length 190. internal thread Integral cable Length 1. Height 41.5 mm (7.) Enveloped acceleration 0.95 lb. Handheld monitoring Technical data SKF Machine Condition Detector Pro IS (page 8) Designation CMVL 3600-IS Designation CMVL 3600-IS Measurements Physical characteristics Vibration pickup Integrated piezoelectric acceleration Case Water and dust resistant (IP 65) (ceramic. depth 5 mm.700 in.5 m (5 ft. B.) Connector Eight pin modular plug Structure Dust-proof. Meets ISO Standard Width 43.) (equivalent Peak). D T3A (USA. (0.) 10816-1.02 to 3.3 to 20. C.) approximate Tapped hole M6.) Humidity 5 to 95% noncondensing Power Communications port Main power Two (2) 1.70 in.0 gE Weight 431 g (0. Division 1. Temperature 0 to +100 °C (32 to +212 °F) 635 g (1.4 mm (1. Canada) SKF MicroVibe P (page 10) SKF MicroVibe P Accessory CMSS 3811 Accelerometer Type Pre-amp is built-in. P = 1.50 in.1 oz.

8 kHz/38. See photograph.) Shape Conforms to CF Card TYPE II.SKF MicroVibe P (page 10) Designation CMVL 3860-ML Minimum PDA requirements* Conforms to the Pocket PC specifications Operating system Microsoft Windows Mobile 3.3 V (supplied by Pocket PC) Current Standby 44 µA Under measurement 48 mA Pickup input (PU IN) AC voltage signal Maximum ±2.8 kHz (changes according to mode) 76. ICP type pre-amp built-in accelerometer is not connected.0/6.5 V Output terminal Mini-jack (2.) Depth 16.66 in.3 V only Recommended specifications Processor PXA255 400 MHz or higher Memory (RAM) 64 MB or higher Interface with Pocket PC Compact Flash TYPE II Slot 3.88 oz.36 in.0/5. non-condensing Weight 25 g (0.0 kHz E3: 500 Hz to 10 kHz E4: 5 kHz to 20 kHz Temperature range 0 to +45° C (32 to +113 °F) Humidity range <90% relative humidity.1 mm (1.3 V only Power supply +3.0 Processor ARM processor Interface Compact Flash TYPE II Slot 3.0 kHz Displacement 10 Hz to 150 Hz Enveloped Acceleration Filter E1: 5 Hz to 100 Hz E2: 50 Hz to 1. Color Black * May not work with all PDAs.4 kHz Aliasing filter 20 kHz/2 kHz (changes according to mode and sampling frequency) A/D 16-Bit Dynamic range 90 dB Lines of resolution 1 600/800/400 Averages 8/4/2/1 Window Hanning Frequency range Acceleration 10 Hz to 30 kHz (upper frequency is selectable) Velocity 10 Hz to 1.5 mm F) Sampling frequency Maximum 76. 23 .5 V Input terminal Eight pin modular jack (RJ-45).0 mm (2.9 mm (0. Card Type.) approximate (card only) Dimensions Width 42.67 in. Raw waveform output (PU OUT) AC voltage signal Maximum ±2.) Height 60.

0 mm (7.1 °F Hard case Water resistant.3 x 4.95 default – adjustable 0 0.00 x 7.) Weight 0. 8 color palettes.) to infinity Image storage Up to 1 000 images on Micro SD card supplied Display 3 1⁄2 in.9 °C) 0.) Note: Under an electromagnetic field of 3 V/m from 90 to 360 MHz the maximum error is ±10 °C SKF Thermal Camera (page 13) Designation TKTI 10 Performance Temperature range –10 to +350 °C (14 to +660 °F) Field of view (FOV) 20° x 20° Spectral Response 8 to 14 µm Sensitivity ~0.1 to 1.3 mm (7.4 Hz Battery life  ypical 180 hours. dust-proof case Response time (90%): <1 sec Dimensions 330 x 197 x 66 mm (13.71 in.1 to 1 step 01 Modes  aximum.) Accuracy (Tobject = 15 to 35 °C.62 oz.85 in.70 kg (1.0 mm (1.1 g (13. Handheld monitoring SKF Infrared Thermometer (page 12) Designation CMSS 3000-SL Designation CMSS 3000-SL Measurement range – 60 to +1 000 °C Distance spot ratio 50:1 (–76 to +1 832 °F) Dimensions Operating range  to +50 °C 0 Height 203.8 °F) Depth 47.) Accuracy Weight:  86.60 in.75 x 2.1° C /0. Lock (allows Relative humidity 5 to 95% non-condensing for continuous temperature scan) Resolution (from –9.3 °C @ 30 °C Thermal detector/ visual camera 47 x 47 pixel array (interpolated to 180 x 180) /2 Mega pixel digital camera Emissivity Correction User selectable 0.01 Emissivity table of common surfaces built-in with reflected ambient temperature compensation Accuracy The greater of ±2 °C or ±2% of reading in °C Frame rate 8Hz Focal range 0. Minimum. minimum 140 hours T Wave length response 8 to 14 µm continuous use.5 lbs.5 in.) (32 to +122 °F) Width 197.3 m (19 in.90 in.0 in steps of 0. without laser and back light) Emissivity range  . color LCD with LED Backlight.) Software Advanced imager analysis and report writing software Computer Requirements PC with minimum of 300 MHz processor.0 °C (±1. Average M Difference (max–min).9 to +199.8 x 3. (Alkaline.) 3 (Tobject = 33 to 1 000 °C. Tambient = 25 °C) ±1. Tambient = 23 ±3 °C) ±2% of reading or +2 °C including batteries (+4 °F) whichever is greater Power Two AAA batteries (included) Update frequency 1. Mixed thermal and visual images Laser pointer Built in Class 2 laser Imager Power Supply Battery Lithium-ion field rechargeable Operation time Up to 6 hours continuous operation AC operation AC adaptor supplied Mechanical & Environment Temperature operating –5 to 45 °C (23 to 113 °F) Humidity 10% to 90% non condensing Storage range –20 to 60 °C (–4 to 140 °F) Ingress protection IP 54 Dimensions 210 x 120 x 90 mm (8. MS Windows XP 128 Mb RAM 16 bit color graphics with 1024 x 768 capability 24 .

User selectable backlight and low battery warning Case dimensions (w x d x h) 255 x 210 x 60 mm (10 x 8. 16 ohms Probes Scanning module stainless steel unisonic (single transducer) piezoelectric crystal type.) Carrying case Cordura/nylon soft pack with die cut foam SKF Electrical Discharge Detector Pen (page 15) Designation TKED 1 Power supply 4.3 in.3 x 2. AM4) Time control Presets 10 or 30 seconds Default indefinite Operational and storage temperature 0 to 50 °C (32 to 122 °F) –20 to 70 °C (–4 to 158 °F) Ingress protection level IP 55 Display LCD counter range: 0 to 99 999 discharges. stainless steel waveguide Rubber focusing probe Shields stray ultrasonic signals and focuses detected signals Response time 300 millisec Ambient operating temperature range 0 to +50 °C (32 to +120 °F) Relative humidity 10 to 95% noncondensing at up to +30 °C (+86 °F) Storage temperature –18 to +54 °C (0 to +130 °F) Dimensions: Height 133 mm (5.) Battery lifetime > 150 hours or 3 000 tests 25 .) Width 50 mm (2.) Readout Green/red grading.) SKF OilCheck monitor (page 17) Designation TMEH1 Designation TMEH1 Suitable oil types Mineral and synthetic oils Dimensions Repeatability Better than 5% Width 95 mm (3.5 in.7 in. 3 x standard AAA batteries (LR03.) Total case and contents weight 0. stethoscope/contact module stainless steel plug-in type with 5.88 lbs.00 in.8 in.5 V.) Length 203 mm (8. numerical value (0 to 100) Height 250 mm (9.) Battery 9 V Alkaline IEC 6LR61 Depth 32 mm (1.00 in.25 in. stainless steel sensor enclosures Circuitry SMD/solid state hybrid heterodyne receiver Frequency response 20 to 100 kHz (centered at 38 to 42 kHz) Indicator 10 segment LED bar graph (red) Sensitivity selection Eight position precision attenuation Power 9 V alkaline battery Low battery voltage indicator LED Headset Lightweight foam lined double headset wired monophonic impedance.3 in.) Weight 320 g (11 oz.4 kg (0.SKF Inspector 400 Ultrasonic Probe (page 14) Designation CMIN 400-K Construction Handheld ABS pistol type ultrasonic processor.

1% full scale plus clamp-on sensor accuracy (active power.) Depth 60 mm (2. red. one (1) set each Power cord.30 in. P (9727/9728 PC card. Handheld monitoring Technical data Hioki Clamp-on Power Meter (page 19) Designation CPT3169-20 Measurement line type (50/60 Hz) Single-phase. 50/60 Hz Dimensions Width 210 mm (8. 256 MB to 512 MB RS 232C (Printer or PC connected to an RS 232C interface) External input/output Display update rate  pproximately every 0. four systems Three-wire. Flash ATA card type). PC card standard compliant Type II. two systems Three-phase Three-wire (measures the voltage and current for two lines) two systems Three-wire (measures the voltage and current for all three lines) one system Four-wire (measures the voltage and current for three lines) one system Four-wire (measures the voltage for three lines and the current for four lines) one system Measurement range Voltage 150 to 600 V. one (1) each Input cord label. three-wire system Three-phase. yellow. ±0. A or when performing RS 232C communications) Power supply voltage rating 100 to 240 V AC.2% single reading. one (1) each Operating manuals – advanced edition and Quick Start Guide Advanced edition and RS 232C interface operating manuals (CD) 26 .) Weight 1. and blue).) Height 160 mm (6. four-wire system Number of systems that can be measured (for systems that share the same voltage) Single-phase Two-wire.01% full scale (full scale is the sensor’s rated primary current value) Frequency characteristic  undamental waveforms up to the 50th order ±3% full scale plus measurement accuracy F (of a 45 to 66 Hz fundamental waveform) Other functions  C card (One slot.5 seconds (except when using a PC card while accessing the internal memory.27 in. five ranges Power 75 W to 9 MW.2 kg (42 oz. ±0. 108 combination patterns Basic accuracy ±0. two-wire system Single-phase.36 in. at 45 to 66 Hz) Clamp sensor accuracy Hioki Power Meter Clamps CPT9661 (rated for 500 A) ±0. three ranges Current (when using Hioki Power Meter Clamps CPT9661) 5 to 500 A. three-wire system Three-phase.3% single reading.) Accessories supplied Voltage cord set (one cord each of black.

5 V AC Accuracy (at 45 to 66 Hz) Amplitude ±0.Hioki Power Meter Clamps (page 20) Designation CPT9661 Rated input current 500 A AC Rated output current 0.) Weight 360 g (12.03 in.94 in.) Height 151 mm (5.84 ft. ±0.) Depth 42 mm (1.5° or less Frequency characteristics 66 Hz to 5 kHz (±1% or less from accuracy) Maximum allowable input Continuous 550 A rms (45 to 66 Hz) Maximum circuit voltage 600 V AC rms (insulated wire) Core jaw diameter † 46 mm (1.81 in.) Cord length 3 m (9.5% single reading.) Dimensions Width 77 mm (3.) 27 .65 in.2% full scale Phase ±0.7 oz.

Handheld monitoring 28 .

Portable data collectors and analyzers   SKF Microlog Analyzer series 30   SKF Microlog Analyzer MX 32   SKF Microlog Analyzer GX-E 33   SKF Microlog Analyzer GX-M 34   SKF Microlog Analyzer AX 35   Analysis modules and Product Support Plan 36   Technical data 37 29 .

loaner units. monitoring needs. hand-held condition monitoring units. or with be easy to handle. see page 36. This training is conducted by data collector to build new functionality an SKF Reliability Maintenance Institute – without having to buy another instructor. instrument. processors and optimum data storage and green LED alarm indicators for capacity. For more information. For more information. see page 36. and are designed to Product Support Plan. color Exchange knowledge based web portal. and red. which provides a non-contact infrared sensor. including handheld and magnetically mounted accelerometers. SKF Microlog Analyzers are built Each SKF Microlog Analyzer bundle line monitoring systems. ergonomic design One-year Product Support Plan mounted vibration sensors. Data capture from a range of sources SKF Microlog Analyzers automatically collect both dynamic (vibration) and static (process) measurements from almost any source. Temperature to withstand punishing industrial includes a full year of the Premier measurements can be collected with environments. withstand multiple drops from six feet. For more information. high-speed data liquid crystal displays. firmware a contact probe. and a one-year State-of-the-art The units also feature function keys subscription to SKF’s @ptitude operating technology with right or left-hand operation. and can upgrades. meet changing needs Analyzer bundle. amber. SKF Microlog Analyzers handle the tasks required to perform predictive maintenance on rotating machinery in countless industries. With robust. units seal out dust and water. permanently Rugged. SKF Microlog Analyzers enhanced visibility. SmartStart training are equipped to operate within SmartStart product start-up training today’s most advanced computerized Separate analysis modules is also included with each SKF Microlog maintenance management systems. These IP 65-rated unlimited technical support. Users can select the your employees trained. system for direct access/data transfer types of analysis. then upgrade the effectively. Portable data collectors and analyzers SKF Microlog Analyzers Portable data collection and analysis for predictive maintenance Unmatched versatility. see page 67. and your to PC environments using USB features required to meet their plant’s program implemented quickly and connectivity. Designed to help users establish or upgrade an existing condition monitoring program. This on-site product All units are programmed to function Units can be upgraded with a range startup service focuses on getting the with the latest Windows operating of individual modules for specific SKF Microlog Analyzer up and running. or on. reliability and functionality have made the SKF Microlog Analyzer series of data collectors the premier choice for portable. preventive maintenance. 30 .

SKF Microlog Analyzer overview MX GX-E GX-M AX-M Channel(s) single 2 up to 2 2 2 up to 4 2 Routes Non-route 2 2 2 Single-route 2 Multi-route 2 2 Software Analysis and Reporting Software 2 + + Basic Vibration Analysis System 2 SKF @ptitude Analyst 2 2 Analysis Modules Conformance check 2 + Balancing + 2 2 FFT analyzer + 2 2 Bump test + + + Run up Coast down (RUCD) + + + Frequency response function (FRF) + + + Data recorder + + + 2 Standard with the Microlog bundle + Available add-on modules 31 .

rubber bump sleeve. One year style tree display of Premier Product Support Plan (coverage begins at time of shipment). Description data is automatically displayed in CMXA44 1ADS-US*  KF Microlog MX bundle includes: CMXA44 instrument with Conformance Check S an interactive graphical plot module. accelerometer kit (accelerometer • Browse and manipulate data using a with integral 2 m cable 100 mV/g and magnetic mount). plots in various graphic formats • All data can be saved as CSV files for * SmartStart Training is part of the bundled package of goods and services. Reporting software or Microsoft Excel 32 . The SKF Microlog MX (CMXA44 1ADS-US) must be ordered in combination with the SmartStart Training for direct import into SKF Analysis and SKF Microlog MX (WICM253). displaying and analyzing data • Provides direct uploading of data Ordering details from the MX. and grade current machinery condition. The unit comes pre-installed with non-route-based collection the Conformance Check module. leather neck familiar Microsoft Windows Explorer. USB communication cable. or create custom functionality standards using the conformance • On-screen user assistance set-up generator tool to set your own • Ergonomic design with large limits. that assesses up to 64 individual production line quality testing. power adapter/ battery charger. • Simple to use for non-vibration use “go/no-go” test. flexible analysis library of standards. Portable data collectors and analyzers SKF Microlog Analyzer MX Easy-to-use 2-channel tool handles a range of applications Combining the functionality of several Key features instruments in one handheld device. • Generate text-based reports or WICM253*  martStart Training for Microlog MX (3 days onsite training. hard shell carrying case. and Analysis and Reporting PC software. the MX features an intuitive user interface • Easy data transfer and storage with step-by-step on-screen instructions. The unit also uses color coding to highlight test status. user manual on CD. New analysis modules FFT analyzer) can be easily uploaded to build functionality. alert users to invalid measurements. color display Developed for use by both vibration • Easy operation function keys experts and non-experts. hand strap. Order no. • Conformance Check module provides the SKF Microlog Analyzer MX can user with a simple “go/no-go” test be used for machinery diagnostics. providing the user with a simple-to. • Balancing • Data recorder SKF Analysis and Reporting • Frequency response function (FRF) software • Run up Coast down (RUCD) • PC-based application for transfer- ring. strap. Upgrade analysis modules Offering a modular approach. battery. abnormal conditions. power cable. or as a fault criteria field service tool. • Supports 2-channel. with a mouse-click. the • FFT analyzer MX allows you to add features as your • Bump test (packaged with needs grow. S including 5 manuals). You can choose experts an appropriate test from an existing • Modular.

33 . hand strap. • Automatically selects optimum route-based data collection and data acquisition settings fundamental analysis tasks. • Minimum number of user Equipped with easy-to-use Basic configuration settings Vibration Analysis System software. WICM263*  martStart Training for SKF Microlog GX-E (4 days onsite training. hand strap. the GX-E supports single-channel.SKF Microlog Analyzer GX-E “Entry-level” unit enables route-based data collection The SKF Microlog Analyzer GX-E Key features: gives users the basic functionality • Supports single-channel. power cable. needed to establish an entry-level single route-based collection predictive maintenance program. and Basic Vibration Analysis software. • Factory upgradable sized plants that want to implement a condition-based predictive maintenance program. (2) screen protectors. The SKF Microlog GX-E (CMXA70-E-K-SL-D) must be ordered in combination with the SmartStart Training for SKF Microlog GX-E (WICM263). power adapter/battery charger. battery pack. and asset information page). USB/power splitter cable. magnetic base. Basic Vibration Analysis System Software • Uploads data and handles tasks of sorting. hard shell carrying case. Description CMXA70-E-K-SL-D*  KF Microlog GX-E bundle includes: CMXA 70 instrument programmed for single- S channel route measurement. CD-ROM (with user manuals. accelerometer. S including 5 manuals) * SmartStart Training is part of the bundled package of goods and services. accelerometer cable. and manipulate collected data • Graphically display and generate ­reports on collected measurement data to analyze machine condition • Use the alarm detection feature to quickly scan for abnormal machine conditions Ordering details Order no. download measure- ment point set-ups. shoulder strap. storing and reviewing measured data • Use software to configure measure- ment points.to medium. One year of Premier Product Support Plan (coverage begins at time of shipment). • Ergonomic design with large The GX-E’s ease of use and color display upgradable platform make it an • Easy operation function keys ideal option for small. utilities.

Description routes. • Supports single and dual channel the SKF Microlog Analyzer GX-M route and non-route data collection combines high performance and • Significant data storage for large ease of use for a range of predictive and/or multiple route collection maintenance tasks. (2) accelerometers. and customizable toolbars all (2) magnetic bases. plots. SAP or Maximo Ordering details • Flexible set-up of databases and Order no. • Operates with SKF @ptitude Analyst The GX-M can be easily upgraded software with additional analysis modules to enhance functionality – without the • Field upgradable need to buy another instrument. Portable data collectors and analyzers SKF Microlog Analyzer GX-M “Master-level” unit for 2-channel. reporting CMXA70-M-K-SL/ SKF Microlog GX-M bundle includes: CMXA 70 instrument programmed for two- and alarm parameters CMSW7300D* channel route measurements and one or two plane static or dynamic couple balancing application. multi-route. (2) screen protectors. The GX-M connects seamlessly with SKF @ptitude Analyst software.e. shoulder strap. OSIsoft PI System.e. • Analytical displays. including 5 manuals). power adapter/battery charger. as well as analysis. and of the software SKF @ptitude Analyst for Microlog Software. and management The GX-M builds on the same basic functionality of the entry-level GX-E. hard shell carrying case. and interfaces * SKF Analysis and Reporting software is required with your company’s Computerized for these modules. SKF @ptitude Analyst software • Provides fast. This makes the • Phase readings from trigger input GX-M an ideal choice for plants that and cross-channel have already implemented and wish to • Ergonomic design with high expand on a condition-based predictive resolution color display maintenance program using vibration • Easy operation function keys measurements. • Single and dual plane balancing with the addition of two channel and application balancing functionality. One year of Premier • Alarm View window displays all Product Support Plan for SKF Microlog GX and @ptitude Analyst Software (coverage begins at time of shipment). rubber bump sleeve. route-based data collection Supporting 2-channel. battery pack. power cable. connector cover set with lanyard. and makes • Bump test it accessible throughout your • Data recorder organization • Frequency response function (FRF)* • Incorporates data from other sources. contribute to the user-friendliness CD-ROM (with user manuals. machines that require immediate WICM263*  martStart Training for SKF Microlog GX-M and @ptitude Analyst Software S attention to help you quickly identify (4 days onsite training. analysis and retrieval of Upgrade analysis modules machine information. (2) accelerometer cables. easy-to-read USB/power splitter cable. Key features or non-route-based data collection. i. utilities. Maintenance Management System (CMMS). The SKF Microlog GX-M (CMXA70-M-K-SL/CMSW7300D) must be ordered in combination with the SmartStart Training multi-parameter analysis utilizing the for SKF Microlog GX-M (WICM263). software’s many functions 34 . and reliable storage. and asset information page). efficient. hand strap. single client. • Run up Coast down (RUCD)* i. and prioritize corrective actions • Versatile viewing options permit * SmartStart Training is part of the bundled package of goods and services.

SKF Microlog Analyzer AX-M
Flexible, 4-channel performance
has never looked better
Featuring a large, easy-to-read color Key features
display, the SKF Microlog AX-M takes • Simultaneous collection of up to
route-based data collection and stand- 4 input channels
alone analysis to a new level. As the
• Supports single channel measure-
latest, most advanced addition to the
ments, multiple channels for balanc-
SKF Microlog Analyzer Series, the
ing, orbit analysis, and connections
AX-M offers four input channels for a
to permanently installed transducers,
wide range of data collection including
and triaxial accelerometer collection
traditional readings from individual
transducers, triaxial accelerometer • Large 6.4 in. VGA color display for
support, and simultaneous collection easy viewing and analysis in any light
of up to four separate inputs. • 806 MHz Xscale processor means
Users can select analysis modules to faster real time rate and display
create a custom device suited to their updates
requirements. Advanced capabilities • Rechargeable lithium battery
include impact natural frequency supports over 8 hours of continuous
testing, digital data recording, modal data collection
and operating deflection shape FRF • Modular, flexible analysis functionality
measurements, transient analysis,
• Field upgradable
and quality/acceptance testing.
The AX-M connects seamlessly
with SKF @ptitude Analyst software.
Upgrade analysis modules
SKF @ptitude Analyst software • Bump test
• Provides fast, efficient, and reliable • Data recorder
storage, analysis and retrieval of • Frequency response function (FRF)*
machine information, and makes it
• Run up Coast down (RUCD)*
accessible throughout your organization
• Conformance Check
• Incorporates data from other sources;
* SKF Analysis and Reporting software is required
i.e. OSIsoft PI System, and interfaces for these modules.
with your company’s Computerized
Maintenance Management System
(CMMS); i.e. SAP or Maximo
Ordering details
• Flexible set-up of databases and
Order no. Description
routes, as well as analysis, reporting
CMXA80-M-K-SL/ SKF Microlog AX-M bundle includes: CMXA 80 instrument programmed for 4-channel
and alarm parameters CMSW7300D* off-route/2-channel route or triaxial route, and balancing modules, USB/power
• Analytical displays, easy-to-read splitter cable, USB/A to B cable, docking station, battery pack, power cable,
power adapter/battery charger, (2) accelerometers, (2) accelerometer cables,
plots, and customizable toolbars all
(2) magnetic bases, hard shell carrying case, soft case, (2) hand straps, shoulder
contribute to the user-friendliness strap, (2) screen protectors, Fischer connector dust cover set, SD card slot and
of the software dock connector cover with 1 GB SD Card, CD-ROM (with user manuals, utilities,
and asset information page), and SKF @ptitude Analyst for SKF Microlog Software,
• Alarm View window displays all single client. One year of Premier Product Support Plan for SKF Microlog AX-M and
machines that require immediate SKF @ptitude Analyst Software (coverage begins at time of shipment).
attention to help you quickly identify WICM264*  martStart Training for SKF Microlog AX-M and SKF @ptitude Analyst Software
S
and prioritize corrective actions (4 days onsite training, including 5 manuals).

• Versatile viewing options permit * SmartStart Training is part of the bundled package of goods and services. SKF The Microlog AX-M
multi-parameter analysis utilizing (CMXA80-M-K-SL/CMSW7300) must be ordered in combination with the SmartStart Training
the software’s many functions for SKF Microlog AX-M (WICM264).

35

Portable data collectors
and analyzers

Analysis modules and Product Support Plan
Conformance check module Premier Product Support Plan
The conformance check
functionality transforms Protecting your technology
the Microlog into a tool for investment
everyday inspection after delivery, SKF is committed to providing the best
installation, or repair of machinery. customer and product support in the
An automated assessment compares industry. Our goal is to help you get
vibration levels with established limits the greatest return on your investment
and a pass or fail indication is displayed Frequency response function by assisting you in extending the life
to check that the product complies module of your product and facilitating the
with predefined quality indicators or success of your reliability program.
This module has two
requirements. primary functions: The one-year Premier Product
Support Plan includes:
Bump test module
• Establishes the properties of • Free upgrades of all major firmware
A bump or rap test is an mechanical structures (mass, stiffness
impact test carried out to and software releases
and damping) by performing modal
excite the machine and • Unlimited access to technical support
analysis using a calibrated hammer
measure its natural frequencies. through telephone and e-mail
for the excitation
This helps to determine if resonance • Annual preventive maintenance keeps
• Measure and displays the transfer
is responsible for high noise or your equipment running optimally,
function (ratio) between two acceler-
vibration levels or if there is a potential helping ensure the reliability of your
ometers while a machine is running.
machinery problem. data collection and extending the life
Measurements can be exported to
of your products
Data recorder module external software to calculate and
animate the Operating Deflection • Convenient repair process reduces
Signals from sensors paperwork and allows for quick
Shapes
connected to the Microlog are return of equipment with loaner
digitally recorded and stored Balancing module units guaranteed
as standard time waveform (WAV)
This module allows precision • Proactive notification of maintenance
files. These files can be sent via e-mail
balancing of rotating releases
or transferred to a computer for post
machinery across a wide • Calibration of your SKF Microlog
processing in external software.
range of speeds. It performs single- Analyzer as often as your company
Run up Coast down module plane, two-plane, and static-couple standards require
balancing with high precision. Clear, • One-year subscription to SKF
This module records and
comprehensive setup menus and @ptitude Exchange knowledge web
analyzes data from machines
easy-to-follow display screens with portal, that offers hundreds of white
where noise or vibration
graphical data representation allow papers, tutorials and interactive
levels are changing with speed, time
easy operation. services
or load to establish the critical/resonant
speeds of a machine. The module FFT analyzer
simultaneously acquires a noise or
The module allows you
a vibration signal plus a tachometer For more information on analysis
to quickly set up spectral/
signal and stores the data as a time modules and Product Support Plans,
phase measurements and please contact your SKF Authorized
waveform (WAV) file for further
immediately collect the data for in- Distributor or your local SKF
analysis.
the-field FFT spectrum and phase Representative.
analysis purposes. After collection, the
data may be stored in the Microlog for
future review and can be transferred
to a computer for additional analysis,
reporting or storage.
36

Technical data
SKF Microlog MX, GX and AX (page 32–35)
Feature MX GX-E GX-M AX
Frequency range 40 kHz – 2 channels 20 kHz – single channel 40 kHz – 2 channels 80 kHz for 1 or 2 channels,
40 kHz for 3 or 4 channels
Certifications Zone 2, CSA Class I Div 2 (NI) CSA Class I Div 2 (NI) Zone 2, CSA Class I Div 2 (NI) CSA Class I Div 2 (NI)
Size 186 x 93 mm 186 x 93 mm 186 x 93 mm 220 x 220 x 71 mm
(7.44 x 3.72 in) (7.44 x 3.72 in) (7.44 x 3.72 in) (8.66 x 8.66 x 2.80 in.)
narrowest point narrowest point narrowest point
186 x 134 186 x 134 186 x 134
(7.44 x 5.36 in) (7.44 x 5.36 in) (7.44 x 5.36 in)
widest point widest point widest point
Weight 715 g (1.6 lbs) 715 g (1.6 lbs) 715 g (1.6 lbs) 1,54 kg (3,.4 lbs.)
Display type Transflective Color LCD Transflective Color LCD Transflective Color LCD TFT VGA backlit color LCD
64K Colors 64K Colors 64K Colors 256K Colors
Host software Analysis and Basic Vibration SKF @ptitude Analyst SKF @ptitude Analyst
Reporting Module Analyst Software
Display size 72 x 54 mm 72 x 54 mm 72 x 54 mm 131 x 98 mm
(2.83 x 2.13 in.) (2.83 x 2.13 in.) (2.83 x 2.13 in.) (5.16 x 3.86 in.)
Display resolution
pixels 240 x 320 (1/4 VGA) 240 x 320 (1/4 VGA) 240 x 320 (1/4 VGA) 640 x 480 resolution
LEDs Green, Amber, Red Green, Amber, Red Green, Amber, Red Blue, Green, Amber, Red
Connectors Fischer, Type 103 Fischer, Type 103 Fischer, Type 103 Fischer, Type 103 and 102
Number of
simultaneous channels 2 1 2 route and non-route 3 route, 4 non-route
Ingress protection rating IP65 IP65 IP65 IP65

Drop test 2 meters, Mil-Std 810E 2 meters, Mil-Std 810E 2 meters, Mil-Std 810E 1,2 meters, Mil-Std 810E
Operating temperature –10 to +50 °C –10 to +50 °C –10 to +50 °C –10 to +60 °C
(+14 to +122 °F) (+14 to +122 °F) (+14 to +122 °F) (+14 to +140 °F)
Storage temperature –20 to +60 °C –20 to +60 °C –20 to +60 °C –20 to +60 °C
(–4 to +140 °F) (–4 to +140 °F) (–4 to +140 °F) (–4 to +140 °F)
Data storage memory 64 MB 64 MB 64 MB 128 MB DDR SDRAM
internal (up to 4 GB SD card) (up to 4 GB SD card) (up to 4 GB SD card) 128 MB NAND Flash
Battery technology Li-ion 2 200 mAh Li-ion 2 200 mAh Li-ion 2 200 mAh Li-ion 6 600 mAh with
integral gas gauging
Battery capacity/ 2 200 mAh/8 h 2 200 mAh/8 h 2 200 mAh/8 h 6 600 mAh/
life (hours) 8 h continuous

Processor type Intel 400 MHz Intel 400 MHz Intel 400 MHz Marvell 806 MHz PXA320
DSP technology Motorola 80 MHz Motorola 80 MHz Motorola 80 MHz Freescale DSP56311
Operating system CE.Net v4.2 CE.Net CE.Net Windows Embedded CE 6.0

User interface MX GX-E GX-M AX
Full hierarchy display N/A No Yes Yes
Missed point indication Yes No Yes Yes
Multiple measurement
storage/historical data N/A No Yes Yes
Multiple historical
data review (waterfall) Yes No Yes Yes
Type-in text notes N/A No Yes Yes
Overall bar No No Yes Yes

37

Portable data collectors and analyzers 38 .

Fault detection and sensors   SKF Copperhead Fault Detection System CPHD kits 40   Loop-powered Vibration Transmitters series CMSS 420VT 43   General Purpose Industrial Accelerometers CMSS 2100/2200 45   Eddy probe systems 46   Technical data 52 39 .

mineral processing and cement industries. 40 . in both time and money. gear and bearing damage. stainless connected with a portable data steel enclosures. • Conveyors are supplied as made-to-order kits SKF Copperhead becomes part of the including rugged sensors. than planned shutdowns for maintenance and repair. capabilities are used. and high temperature collector. unbalance. or integrated into a plant/ • Agglomeration drums SKF Copperhead Fault Detection Systems mine process automation system. Fault detection and sensors SKF Copperhead Fault Detection System CPHD kits Fault detection systems for mining. enclosures plant/mine process automation system • Crushers for periodic or continuous monitoring. It can also be • Roller presses and display/alarm modules. • Fans sensors (up to 200 °C/390 °F) for SKF Copperhead systems enable plant/ • Gearboxes higher temperature grinding and mine operators and maintenance to: • Motors process machinery applications. With SKF Copperhead Fault Detection Systems. pump cavitation) each application needs to be evaluated • Improve productivity to determine the best combination of components for the system kit. SKF Copperhead systems detect faults such as loose components. and high temperatures. used in a predictive maintenance • Horizontal and vertical mills The kits can be supplied with sensors program when the sensors are • Vibrating screen with alternative cable lengths. Contact your SKF representative for height and machinery repairs) assistance when selecting your SKF Copperhead Fault Detection System kit. Using the latest vibration and temperature measurement techniques to monitor equipment. • Avoid unplanned downtime • Pumps Mining. • Reduce safety hazards (rotating. machinery faults can be detected before an unplanned shutdown occurs. mineral processing and • Reduce maintenance and repair costs cement machines come in many • Detect process faults (machinery different configurations. function. mineral processing and cement Unplanned production shutdowns caused by faults in mining and cement machinery always cost more. stand-alone continuous Applications Made-to-order kits monitoring. when the continuous fault detection • Kilns vibration and temperature transmitters. lack of lubrication. These pre-engineered and easy-to- install systems can be used for periodic monitoring. The systems feature rugged sensors developed for the harsh mining. therefore.

front panel digital display and alarm kilns. misalignment monitoring. When used with the low speed/higher sensitivity sensors. and unbalance The transmitter has an optional special 10 second decay feature for monitoring large. enveloped acceleration. low rotational speed machines. continued on next page 41 .) armored cable The kit provides permanent Display/alarm module mounted sensors for a safe. system. All “E” type enclosures come standard with a universal voltage/ frequency power convertor and are pre-wired for easy installation. and relay contacts. acceleration • Normal speed sensors (CMPT 2310 or velocity. and more. agglomeration drums. function. it becomes a very effective fault detection system for The display/alarm module has a roller presses. gear and bearing faults.Sensors Enclosures Transmitter For normal or very low speed “B” Type CMPT CTU (<40 rpm) applications For periodic monitoring For vibration and temperature “B” type enclosures are non-metallic The transmitter powers the sensor with snap latches with BNC type and provides a vibration and terminals inside for periodic temperature analog signal which connection with portable vibration and is processed using one of three temperature data collectors such as the user configurable techniques: SKF SKF Microlog Analyzer or equivalent. including programmable alarm settings. or can provide stand-alone vibration and temperature monitoring when the enclosure includes the display/alarm module (CMPT DCL). and CMPT 2310T) have 100 mV/g • SKF enveloped acceleration vibration vibration sensitivity analysis is used to identify repetitive • Low speed sensors (CMPT 2323 impact type vibrations generated and CMPT 2323T) have a higher by machinery faults due to loose 230 mV/g vibration sensitivity components. reliable CMPT DCL and repeatable periodic predictive maintenance program. vertical grinding mills. These enclosures can be connected One display/alarm module is needed directly to the plant/mine automation per vibration and temperature signal. • Available for monitoring both and lack of lubrication acceleration and temperature • Rugged. The display/alarm module is used to provide stand-alone monitoring of the signals from the vibration and “E” Type temperature transmitter (CMPT CTU). a front panel alarm lamp. low profile construction standard with an integral 5m (16 ft. For continuous monitoring • Acceleration vibration analysis is “E” type enclosures are steel with used to monitor overall machine a hinged window door that includes and structural vibration the vibration and temperature • Velocity vibration analysis is used transmitter (CMPT CTU) for continuous to identify looseness.

(1) Enclosure with (4) CMPT CTU transmitters (one per sensor) plus (1) CMPT CTU set to velocity would be SKF Order no. with (2) BNC connectors per vibration and temperature sensor would be SKF Order no. CPHD 3EC. No. Included power converter and terminals. 42 . Fault detection and sensors Ordering details Order no. (5) CMPT DCL display/alarm modules to monitor temperature would be SKF Order no. (230 mV/g) and integral cable length Included power converter and terminals. (1) Enclosure with (3) CMPT CTU transmitters (one per sensor) would be SKF Order no. temperature sensor One CMPT CTU per sensor /23 CMPT 2323 vibration ECV Enclosure with CMPT CTU transmitter for (230 mV/g) sensor monitoring by plant automation. of Enclosure configuration* Alternative sensors Alternative sensor sensors Standard sensor is CMPT 2310T cable length Standard cable length 5 m. CPHD 5ECMT/23T x 10. Ordering examples A kit with (2) CMPT 2310T sensors (standard with 5 m cable). A kit with (3) CMPT 2310T sensors. * Enclosures are standard with CMPT 2310T sensors unless designated with an alternative sensor suffix. check with SKF CPHD 1 B Enclosure with BNC terminals for periodic /10 CMPT 2310 vibration x 10 Sensors with 10 m 2 vibration and temperature monitoring (100 mV/g) sensor integral cable length 3 EC Enclosure with CMPT CTU transmitter for /23T CMPT 2323 vibration x 15 Sensors with 15 m 4 monitoring by plant automation. Plus additional CMPT CTU transmitter set to Velocity ECM Enclosure with CMPT CTU transmitter and CMPT CTU display/monitor for stand-alone monitoring of vibration. A kit with (5) CMPT 2323T x 10 sensors (10 m cable length). (1) BNC enclosure. (5) CMPT DCL display/alarm modules to monitor vibration. Included power converter and terminals ECMT Enclosure with CMPT CTU transmitter and CMPT CTU for stand-alone monitoring of vibrating and temperature. CPHD 2B. (1) Enclosure with (5) CMPT CTU transmitters (one per sensor). A kit with (4) CMPT 2310T sensors. CPHD 4ECV.

D for US and Canada • LED displays actual vibration levels to access the raw acceleration signal in velocity on a Light Emitting Diode • Useful for connecting the CMSS display 420VT to the portable data collectors • Displays are shipped loose. and eventual machine shutdown • Standard 4 to 20 mA output that is proportional to overall vibration in terms of velocity • Dynamic signal output for portable analyzers • Simple installation with available adapters • Accessories available to display the Accessories reading and provide connector for SKF Microlog Display retrofit (requires transmitter) BNC adapter retrofit CMSS 420LCD/CMSS 420LED CMSS 420BNC • CE Approved • LCD displays actual vibration levels in • 90 degree 19 mm (0. C.) NPT • Approved Class 1. velocity on a Liquid Crystal Display conduit elbow with a BNC connector Groups B.Loop-powered vibration transmitters series CMSS 420VT An economical approach to continuous vibration monitoring • Continuous 24/7 vibration signal output • Continuously monitors machine health with integrated sensor • Built in accelerometer and electronics to process vibration signal • Sends signal back along 24 volt power line that supplies its power • Transmits directly to a Program- mable Logic Controller (PLC) or Distributed Control System (DCS) for trending. and installation is simple • Includes BNC connector that provides access to the raw acceleration signal from the CMSS 420VT continued on next page 43 . alarm.75 in. Division 2.

19 by 19 mm (0./s CMSS 420LED-02 Display retrofit – Light Emitting Diode display (LED) 0 to 2 in.8 mm/s (0 to 2 in.75 in. includes 1/4-28 and M8 mounting studs Accessories Order no. 19 by 19 mm (0.) NPT Pipe thread accelerometer mounting adapter CMSS 203-03 3/8 in. Fault detection and sensors Weatherproof cable fitting Pipe thread accelerometer CMSS 420WF mounting adapter CMSS 203 • 19 mm (0.) NPT Pipe thread accelerometer mounting adapter 44 .75 in.8 mm/s CMSS 420LED-01 Display retrofit – Light Emitting Diode display (LED) 0 to 1 in. includes 1/4-28 and M8 mounting studs CMSS 420VT-2 50.75 in.75 in.7 mm (0.75 by 0.25 in.75 by 0. 19 mm (0.4 mm/s CMSS 420LCD-52 Display retrofit – Liquid Crystal Display (LCD) 50./s CMSS 420LCD-02 Display retrofit – Liquid Crystal Display (LCD) 0 to 2 in. NPT Pipe thread accelerometer mounting adapter CMSS 203-04 6.4 mm/s CMSS 420LED-52 Display retrofit – Light Emitting Diode display (LED) 50./s) RMS. Description CMSS 420VT-1 25.) NPT Pipe thread accelerometer mounting adapter CMSS 203-02 19 mm (0.4 mm/s (0 to 1 in.5 in.) BNC adapter retrofit CMSS 420WF NPT Weatherproof cable fitting CMSS 420EL 90 degree.) NPT • Useful for connecting CMSS 420VT to hard or flexible conduit • Provides simple weatherproof exit for instrument wire when used with the CMSS 420WF Ordering details Order no./s CMSS 420LED-51 Display retrofit – Light Emitting Diode display (LED) 25.8 mm/s CMSS 420BNC 90 degree.35 mm (0.) NPT • Provides simple weatherproof exit for • Provided in several NPT sizes to instrument wire when used with the accommodate the most common CMSS 420EL plugs found on most machinery • Adapters have a 1/4-28 threaded hole to mate with the CMSS 420VT and most common accelerometers and vibration transmitters Elbow CMSS 420EL • 90 degree. Description CMSS 420LCD-01 Display retrofit – Liquid Crystal Display (LCD) 0 to 1 in.75 in./s) RMS./s CMSS 420LCD-51 Display retrofit – Liquid Crystal Display (LCD) 25.) NPT Elbow CMSS 203-01 12.

gearboxes.3 mm (0.0 mm CMSS 2200M8: 6. Accelerometers sense vibration Mounts in any orientation. SKF offers rugged accelerometers designed for the pulp Industrial accelerometer with top exit CMSS 2200/CMSS 2200-M8 and paper. MIL-C-5015 two (2) pin connector. MODEL CMSS2100 S/N S00000 23.) 2-Pin • Exceptional bias voltage (BV) stability A B Connector MIL-C-5015 at elevated temperatures 20. 45 .0 mm general purpose sensor (1.0 mm • Sensitivity. protection systems 7/8 in. Calibration sensitivity and M8 x 1. MIL-C-5015 Captive Screw • Incorporates the latest technologies 40. 1/4-28 and M6 mounting studs provided.) Hole † 19. metal working. 100 mV/g to optimize use (2. M8 mounting stud provided.25 in. sensors to a broad spectrum of CMSS 2100 industrial accelerometer industry users. Description • Corrosion resistant and hermetically CMSS 2100 General purpose industrial accelerometer with top exit MIL-C-5015 two (2) pin sealed for humid areas connector. mining. rollers. and two pin connector offers a low profile machine tool industries. Maintenance professionals use accelerometers for predictive maintenance to lower overall cost 2-pin Connector 1/4 in. economical.0 mm CMSS 2200: 1/4-28 Mounting thread (2.) 37.87 in.3 mm + - (0. commonly found in most industrial machinery.) 53. EMC. fans.60 in. and mixers. compressors. Industrial accelerometer with side exit construction. machine tool spindles.) 26.) in multiple applications 22. for machinery with limited clearance. (1. top exit.0 mm • Rugged.) • Designed for exceptionally low noise levels for low frequencies at elevated temperatures Ordering details Order no.04 in. 1/4-28 and M8 mounting studs provided. • Two (2) mounting studs (1/4-28 CMSS 2200 General purpose low profile industrial accelerometer with side exit MIL-C-5015 two (2) pin connector. chillers. • Reverse polarity wiring protection CMSS 2200-M8 General purpose low profile industrial accelerometer with side exit MIL-C-5015 two (2) pin connector.General purpose industrial accelerometers CMSS 2100/2200 Rugged.92 in. General purpose. Calibration sensitivity and nominal • Smaller profile sensitivity is provided for each accelerometer package.) MODEL CMSS2200 MODEL CMSS2200-M8 S/N S0000 and low noise level requirements 53. economic vibration sensors for a wide variety of industrial applications Using knowledge acquired from General purpose.75 in.10 in.) M8 Mounting thread on-line systems. Socket Head and increase machinery performance.10 in. pumps.80 in. Hex (0. petrochemical.25) provided and nominal sensitivity is provided for each accelerometer package. many years of supplying high quality industrial accelerometer low profile.0 mm (1. blowers.44 in. side exit.) • For use with SKF junction boxes.0 mm to meet the demanding CE. steel.3 mm A B (0. and all around (0. Applications for acceleration and velocity sensors include machinery health monitoring of motors.0 mm (1.00 in.) and the portable data collection 1/4-28 instruments Mounting 25.

lower frequency limit and are used to System length The physical length of the systems is For complete details on the product measure shaft axial position as well as approximate to the electrical length. C. • Conforms to API 670 – American SKF Eddy Probe Systems catalog. displacement probe. D axial shaft motion. B. The probe’s simplicity and virtually any application. C. D the temperatures and chemicals the probe’s diameter. They have no details. Systems sales representative for frequency response. and an extension cable. barriers or galvanic isolators. driver case – RYTON’s strength ap- proaches that of metal. Excess cable in certain installations Publication CM2004 EN. rugged design enables it to withstand Probe range is limited largely by Class 1 Division 1 Groups A. Eddy probes measure radial or The following should be considered Class 1 Division 2 Groups A. a driver (oscillator Sensitivity approved models. protection systems for rotating Probe case equipment operating in the harsh The size of the probe mounting case conditions found in oil production. driver designations for hazardous area of a probe. and chemical processing Several case options are available. demodulator). The standard typically encountered in harsh machine Intrinsically safe when used with zener SKF probe diameters are 5 mm environments. 46 . The gap over which the system must See ordering details for probe and An Eddy probe system is comprised accurately operate. They are mounted when selecting a system: When connected with National Electric through or to the side of a bearing Code (NEC) without zener barriers or Range cap and observe the shaft’s movement galvanic isolator. B. refining. relative to its mounting position. The material is now beginning to be used in the manufacture of automobile engines • DIN rail mounting and compression connectors are used for optimum installation • Hazardous area approved units are available • Available with standard removable/ reversible connector or the optional permanent fixed connector Note: Eddy probe. and proximity probe are all synonyms for the same or similar products manufactured and supplied by various companies. • Super tough RYTON probe tips and Please see ordering information. Petroleum Institute has published is typically coiled and tied with no Standard 670 to define reliable harmful effects. Association (CSA). please see: vibration. and 8 mm (CMSS 68). Fault detection and sensors Eddy probe systems RYTON-based eddy current transducers Eddy probe systems Selecting an Eddy probe Hazardous area approvals The Eddy probe system is a field system North America proven method for reliably detecting A wide variety of SKF systems are Approvals granted by Factory Mutual various machine displacement offered to meet the requirements of (FM) and Canadian Standards parameters. (CMSS 65). range. Must be compatible with monitors or Contact your local SKF Reliability Eddy probe systems have excellent other companion instruments. may be a factor in some installations.

5 mm Eddy probe system RYTON-based eddy current transducers CMSS 65/CMSS 665 Series 8 mm Eddy probe system RYTON-based eddy current transducers CMSS 68/CMSS 668 Series Standard Eddy probe systems System Usable range Sensitivity System length Standard case Description CMSS 65/CMSS 665 80 mil 200 mV/mil 5 m 1/4-28 Standard system CMSS 68/CMSS 668 90 mil 200 mV/mil 5 m 3/8-24 Meets intent of API 670 CMSS 68/CMSS 668-1 90 mil 200 mV/mil 10 m 3/8-24 Long system length CMSS 68/CMSS 668-2 90 mil 200 mV/mil 15 m 3/8-24 Long system length CMSS 68/CMSS 668-5 15–160 mil 100 mV/mil 10 m 3/8-24 Long range continued on next page 47 .

0 inches 60 9. Class 1 Division 2 certified CMSS 958 Extension Cable: CMSS 958-0H-045 LENGTH Extension Cable.0 inches 30 4.9 inches 91 to 99 *Product dimensions shown on page 49 Extension cable Ordering details System ordering example Order no.8 inches 08 mate directly to the Driver. 0.9 inches 51 to 99 (standard) CSA/FM/SIRA 07 0 3/8-24 threads Reverse mount.5 meter CABLE (Compatible sys. requirements are different from SKF Standard Extension Cable 2. (Fiberglass) Standards: (ATEX) (Intrinsically No case 00 The 5A units have integral cable and Safe) Certified and Armored 0.0 inches 20 2. Description CMSS 65-002-00-12-10  KF standard Eddy current probe S See ordering matrix below to build your order number if requirements are different from SKF standard Eddy current probe CMSS 65 CABLE CASE A* – UNTHREADED CASE LENGTH C* – OVERALL LENGTH +1 Standard 00 2 1/4-28 threads Fully threaded 00 Armored 01 0.5 in.0 inches 90 Specials: 0. 3/8-24 threads RM 5A 5. and it CSA/FM/SIRA 0A (ATEX) (Intrinsically CMSS 65 is not possible to interchange compo- Safe) Certified and Armored CMSS 665.25 in. cable and driver. FM (non-incendive). case length.0 meters CSA/FM/SIRA 09 5 meter system CMSS 65 (ATEX) (Intrinsically CMSS 665. Class 1 Division 2 certified Standard 00 tem listed) Armored 01 Driver: CMSS 665-20-00 Fiberglass sleeved 02 CMSS 665.0 inches 40 4.5 inches 15 FM (non-incendive) 0B 2.7 inches 47 6. 48 . 1.1 inches to 9.2 inches 12 FM (non-incendive) 09 1.5 meter cable.9 to 5.5 meters (standard) (Unthreaded) 10 1. including probe. 0. it is Armored necessary to order a complete system. 030 Driver. 0. length.0 meter Fiberglass sleeved 02 3 M8 x 1 threads 5. If replacing another CMSS 65 FM (non-incendive) 0J manufacturer’s component. Fault detection and sensors 5 mm Eddy probe system RYTON-based eddy current transducers CMSS 65/CMSS 665 Series Eddy current probe Ordering details Order no. 4. 040 Eddy probe systems in general are Safe) Certified 1. unthreaded case length.1 to 9.-28 thread.9 inches 09 to 59 9.5 meters FM (non-incendive) 0H manufacturers. Description for CMSS 65 CMSS 958-00-040  KF standardextension cable S Probe: CMSS 65-092-05-25-05 See ordering matrix below to build your order number if 5 mm tip diameter.0 meters 1 M10 x 1 threads (ATEX) (Intrinsically 4 No case B* – CASE LENGTH Safe) Certified +1: Length is Nominal Electrical: E Button probe CSA/FM/SIRA 08 Physical length may vary. no armor. no armor.0 meter electronically-matched systems.5 in.5 inches 25 Armored 3.1 inches to 5. 2.0 inches 01 to 50 05 0. 045 nents between systems from different 0.

375" CMSS 665-8/CMSS 665P-8 CMSS 65 Probe and CMSS 958 Probe † 0.101" Note: All circuit boards used in SKF CMSS 665 of protection when operated in adverse Series Drivers are conformal coated as standard 6.00") PROBE DRIVER (2.250" 0. continued on next page 49 .5 meter Probe and 4.35 cm 0.50") S/N MADE IN U. Description CMSS 665/CMSS 665P Driver for 5 meter system CMSS 665-1/CMSS 665P-1 Driver for 10 meter system CMSS 665-8/CMSS 665P-8 Driver for enhanced environmental protection CMSS 665-16-9/CMSS 665P-16-9 Driver for hazardous area approval (Intrinsic Safety) CMSS 665-20-00/CMSS 665P-20-00 Driver for hazardous area approval (non-incendive) Drivers containing the “P” in the model number.348") Extension Cable • FM (non-incendive) Certified Driver 30. -24V -24V by GND GND SIG SKF Condition Monitoring CONNECTOR: Stainless steel jack-type mates with CMSS 958 extension cable 1 2 3 4 5 7.06 cm (1.205" • 0.62 cm 5 mm DISPLACEMENT 6.215") 8.62 cm (3. B. (2.030" material to provide additional measure † 0.5 mm (1. it is also filled with potting 0. C.25" clearance hole environmental conditions. denote those models with permanent fixed connector.28" max Certified Driver for 5 meter System of components: Example: Use with CSA/FM/SIRA • 1 meter Probe and 4 meter Armot (optional) (Intrinsically Safe) Certified 1 meter Extension Cable CMSS 65 Probe and 4 meter 1/4-28 OR M8 X 1 thread † 0.0 mm • 1 meter Probe and 9 meter CMSS 665-20-00/CMSS 665P-20-00 5.Driver Driver for hazardous area approval Product dimensions Class 1 Division 1 Groups A.00") REMOVABLE OR PERMANENT FIXED CONNECTOR: Terminal strip type rated for 250 V.0 mm Extension Cable A • For intrinsic safety installations. Extension Cable Cable 0. B 6.190" Specifications same as standard driver.5 meter CMSS 958 Extension Cable 5.8 mm (0.35 cm (3.50") for mounting with number 10 hardware CMSS665 7.200") • or 10 meter Probe for the 5 meter System Button (Disk) probe Driver for enhanced environmental Example: Use with FM CMSS 65 E 00 00 protection (non-incendive) Certified 1 meter † 0. 7/16" HEX 1/8-24 thread UNF 2A Use with these combination mentation of components: Driver for hazardous area approval 5. D Driver for 5 meter system CMSS 665-16-9/CMSS 665P-16-9 CMSS 665/CMSS 665P Standard mount case • CSA/FM/SIRA (Intrinsically Safe) C Use with these combination † 0.5 mm (0.3 mm • or 5 meter Probe drivers must be installed with Reverse mount case Driver for 10 meter system barriers as specified in CSA/FM/SIRA CMSS 65 0 RM 12 CMSS 665-1/CMSS 665P-1 certification and associated docu.A. procedure.S. 10 AMPS 14 AWG maximun wire size 4.100" however.60") Ordering details Order no.

no hazardous area certification Armored 01 Fiberglass sleeved 02 CMSS 668. no hazard- (ATEX) (Intrinsically CMSS 668.1 to 9.7 inches 47 6. 095 FM (non-incendive) 0J manufacturers. 140 necessary to order a complete system. no armor. 3/8 in. FM (non-incendive) 0B 2.5 inches 15 and mate directly to the Driver.0 meters E Button probe (ATEX) (Intrinsically AA 10.9 to 5.-24 thread.0 inches 30 4.2 inches 12 FM (non-incendive) 09 The 5A. FA units have integral cable 1. CMSS 68 50 . 1.0 meter CSA/FM/SIRA 09 CMSS 68 Driver. Extension Cable. 10 meter system. AA.0 inches 90 Specials: 0.1 inches to 9.0 meter is not possible to interchange compo- FM (non-incendive) 0H CMSS 68 nents between systems from different CMSS 668-1. CMSS 958 no hazardous area certification LENGTH Extension Cable: CMSS 958-00-090 CABLE (Compatible sys. reverse mount. Description System ordering example CMSS 958-00-040 SKF Standard Extension Cable for CMSS 68 See ordering matrix below to build your order number if Probe: CMSS 68-000-RM-12-10 requirements are different from SKF Standard Extension Cable 8mm tip diameter.5 meters Armored CMSS 68 manufacturer’s component.0 inches 20 2. case length. 1.0 inches 60 9.9 inches 09 to 59 9. cable and driver. and it Safe) Certified and Armored 1. 3/8-24 threads RM 5A 5. it is CMSS 668-2.0 meters CSA/FM/SIRA 08 Standards: +1: Length is Nominal Electrical: Physical (ATEX) (Intrinsically No case 00 length may vary.2 in. 045 ous area certification Safe) Certified 0. 1.9 inches 51 to 99 (standard) 4 No case CSA/FM/SIRA 07 Reverse mount. 0. Fault detection and sensors 8 mm Eddy probe system RYTON-based eddy current transducers CMSS 68/CMSS 668 Series Eddy current probe Ordering details Order no. If replacing another 0.0 meter including probe. 9.0 meter Standard 00 tem listed) length. Description CMSS 68-002-00-12-10  KF standard Eddy current probe S See ordering matrix below to build your order number if requirements are different from SKF standard Eddy current probe CMSS 68 CABLE CASE A* – UNTHREADED CASE LENGTH C* – OVERALL LENGTH +1 Standard 00 0 3/8-24 threads Fully threaded 00 0.0 meters (Fiberglass) B* – CASE LENGTH Safe) Certified FA 15. 090 electronically-matched systems.0 meter Fiberglass sleeved 02 1 M10 x 1 threads 5. no armor.8 inches 08 Safe) Certified and Armored 1.0 inches 01 to 50 05 0.5 inches 25 Armored 3.9 inches 91 to 99 Extension Cable *Product dimensions shown on page 51 Ordering details Order no. 040 Driver: CMSS 668-1 1.1 inches to 5.5 meters Armored 01 (Standard) (Unthreaded) 10 1.0 meter cable.0 inches 40 4.5 meters Eddy probe systems in general are CSA/FM/SIRA 0A CMSS 68 (ATEX) (Intrinsically CMSS 668-1.

324" • 0.348") Extension Cable CMSS 958 Extension Cable 30.Drivers Driver for enhanced environmental Product dimensions protection Driver for 5 meter system CMSS 668-8/CMSS 668P-8 CMSS 668/CMSS 668P Standard mount case Specifications same as standard driver.110" CMSS 668-20-00/CMSS 668P-20-00 • or 15 meter Probe 6.300" of components: Probe Cable 0. B.5 meter 3/8-24 OR M10 X 1 thread Driver for hazardous area approval 8. it is also filled with potting † 0. denote those models with permanent fixed connector.200" • 1 meter Probe and 14 meter Driver for hazardous area approval 0.35 cm (non-incendive) Certified 1 meter DISPLACEMENT (3. 51 . † 0. 1 2 3 4 5 7.35 cm 0. D B A 7. CMSS 68 Probe and CMSS 958 -24V -24V by GND GND SIG SKF Condition Monitoring • 1 meter Probe and 9 meter Extension Cable Extension Cable CONNECTOR: Stainless steel jack-type mates with CMSS 958 Note: All circuit boards used in SKF CMSS 668 • or 10 meter Probe Series Drivers are conformal coated as standard extension cable procedure. Description CMSS 668/CMSS 668P Driver for 5 meter system CMSS 668-1/CMSS 668P-1 Driver for 10 meter system CMSS 668-2/CMSS 668P-2 Driver for 15 meter system CMSS 668-5/CMSS 668P-5 Driver for extended range CMSS 668-8/CMSS 668P-8 Driver for enhanced environmental protection CMSS 668-16-9/CMSS 668P-16-9 Driver for hazardous area approval (Intrinsic Safety) CMSS 668-20-00/CMSS 668P-20-00 Driver for hazardous area approval (non-incendive) Drivers containing the “P” in the model number. D † 0.0 mm • 1 meter Probe and 9 meter CMSS 68 Probe and 4 meter 6.06 cm (1.A.200") • or 10 meter Probe • For intrinsic safety installations.60") Order no.50") components: S/N MADE IN U.00") PROBE DRIVER (2.091" Extension Cable Class 1 Division 2 Groups A.0 mm Extension Cable Class 1 Division 1 Groups A. 10 AMPS 14 AWG maximun wire size Ordering details 4. Button (Disk) probe Driver for 15 meter system drivers must be installed with CMSS 68 E 00 00 CMSS 668-2/CMSS 668P-2 barriers as specified in CSA/FM/ SIRA certification and associated † 0. C. Use with these combination C however.62 cm (3.25" clearance hole • FM (non-incendive) Certified Driver (2.5 mm (1.9 mm (0.0 mm • or 5 meter Probe CMSS 668-16-9/CMSS 668P-16-9 Reverse mount case Driver for 10 meter system • CSA/FM/SIRA (Intrinsically Safe) CMSS 68 0 RM 12 CMSS 668-1/CMSS 668P-1 Certified Driver for 5 meter System 7/16" HEX Use with these combination Example: Use with CSA/FM/SIRA 3/8-24 thread UNF 2A of components: (Intrinsically Safe) Certified 1 meter 8.275") 8.8 mm (0.50") for mounting with number 10 hardware Driver for extended range for the 5 meter System CMSS 668-5/CMSS 668P-5 Example: Use with FM CMSS668 Use with these combination of 7. B.00") REMOVABLE OR PERMANENT FIXED CONNECTOR: Terminal strip type rated for 250 V.62 cm 8 mm 6.28" Max of components: material to provide additional measure • 1 meter Probe and 4 meter of protection when operated in adverse Armot (optional) Extension Cable environmental conditions.S. C.5 meter Probe and 4.515" 0.500" Use with these combination documentation † 0.

Check with SKF for availability.) integral armored cable Mounting to machinery Supplied with M6 and 6.0 mm (width) Scaleable for vibration (gE. 1 to 5 V DC Thermocouple K. S. g. screw terminals Output averaging option On/Off Copperhead CMPT DCL display/alarm module (page 41) Designation CMPT DCL Accepts the following inputs types Current 4 to 20 mA.35 mm (0. R.4 mm (height) x 4. JPt100 three-wire system LED display 7. g 2 Hz to 20 kHz (RMS and Peak Hold) Velocity. °F). B. 0 to 1 V DC.) or 15 m (48 ft. temperature (°C.) socket head screw Acceleration output range 70 g Shock limit 5 000 g Accelerometer measurement temperature range –50 to +120 °C (–58 to +248 °F) CMPT 2310 CMPT 2310T CMPT 2323 CMPT 2323T Vibration sensitivity 100 mV/g 100 mV/g 230 mV/g 230 mV/g Temperature N/A 10 mV/°C N/A 10 mV/°C Note: Some sensors are available with 10 m (32 ft. 1 A maximum (optional latching or non-latching relay) Setting One programmable alarm setting Output signal 4 to 20 mA proportional to scaled input Copperhead CPHD enclosures for kits (page 41) Designation CPHD enclosures Description Painted steel with hinged window door Dimensions and weight Dependent on kit type IP rating IP66 (NEMA 4) Required supply voltage 100–250 V AC / 50–60 Hz 52 . T.) cables length. C (W/Re5-26) RTD Pt100. mm/s (inch/s) ISO (10 Hz to 1 kHz) Vibration signal decay 1 or 10 seconds (SKF enveloped acceleration) Analog output Processed vibration 4 to 20 mA and 0 to 10 V DC proportional to full scale vibration Temperature 4 to 20 mA and 0 to 10 V DC proportional to 0 to +120 °C Buffered acceleration output BNC connector. 0 to 20 mA Voltage 0 to 10 V DC. J.25 in. O to 5 V DC. N. mm/s. PL-II. Copperhead CMPT CTU vibration and temperature transmitter (page 41) Designation CMPT CTU Vibration process analysis Acceleration Enveloping gE3 (ENV3) Acceleration. E. etc. Fault detection and sensors Technical data Copperhead CMPT Sensors (page 41) Designation CMPT sensors Cable Standard with 5 m (16 ft. Alarm functions Type LED event lamp on front display (red) One relay contact 48 V DC / AC. inch/s).

12 Mounting Stud mounted Weight (without display) 227 g (8 oz. C. provided from an external DC source rated 36 V DC maximum. 100 mV/g Environmental Operating temperature –20 to +80 °C (–4 to +176 °F) Sealed Epoxy encapsulated Enclosure SS.0 V DC for LED. with or without an LED/LCD display.0 V DC for LCD. Groups B.) Regulatory approval CE Mark SKF Loop-powered vibration transmitter CMSS 420 VT and displays CMSS 420LCD and CMSS 420LED Hazardous area ratings The CMSS 420VT is suitable for use in Class 1. 4 to 23 mA. 2. The CMSS 420VT is suitable for use in Class 1. Groups B. D (US and Canada) Electrical ratings 22 to 36 V DC. 23 mA maximum. 53 . 4X. NEMA 4.Loop-powered vibration transmitters (page 43) Designation CMSS 420VT Dynamic Output 4 to 20 mA proportional to full scale velocity Accuracy ±5% of full-scale Frequency response 2 to 2 000 Hz Frequency response accuracy -3 dB 2 Hz to 2 kHz 10% 10 Hz to 1 kHz 5% 15 Hz to 750 Hz Buffered output Acceleration. Division 2.02 RL = Load resistance Vs = DC supply voltage Vd = Display voltage: 5. D (US and Canada) Maximum load Up to 500 ohms resistive at 24 V DC and no display (See Note – Maximum load resistance calculations for specific requirements) Grounding Case isolated Note: M  aximum load resistance calculations: DC Supply Voltage range: 22 to 36 V DC RLmax = (Vs – 14 – Vd) / 0. 0.0 V DC for no display The recommended Load Resistance (RL) for most installations is: 100 or 250 Ω at Vs = 24 V DC. C. Division 2.

Acceptance criteria The generated “false equivalent g level” under the above test conditions should be less than 2 mg peak to peak.7 to 10 000 Hz Resonance frequency Mounted.) Case material 316L stainless steel Mounting Internal 1/4-28 thread. equivalent g. maximum 70 µg/gauss Sealing Hermetic Base strain sensitivity 200 µg/microstrain CE According to the generic immunity standard for Industrial Environment EN50082-2.0 to 5 000 Hz ±10% 1.4 Nm (30 in. operating temperature Vibration limits 500 g peak Shock limit 5 000 g peak Electromagnetic sensitivity. 100 pF/m (30 pF/ft. up to full scale 1% Frequency range ±5% 3. Mounting studs provided.25 metric thread.1 oz. One (1) 1/4-28 English thread One (1) 1/4-28 to 1/4-28 English thread and one (1) M6 x 1.0 to 9 000 Hz 1. 54 .5 to 14 000 Hz 0. 4 mA constant current and 100 Hz. Captive mounting bolts provided.lbs) 3.0 to 5 000 Hz ±3 dB 0. Fault detection and sensors Technical data Industrial accelerometers (page 45) Designation CMSS 2100 CMSS 2200 / CMSS 2200-M8 Dynamic Sensitivity 100 mV/g Sensitivity precision ±5% at +25 °C (+77 °F) ±10% at +25 °C (+77 °F) Acceleration range 80 g peak Amplitude linearity ≤1%.lbf) Connector Pin A Signal/Power Pin B Common Mating connector CMSS 3106F-10SL-4S or equivalent Recommended cable Two conductor shielded. recommended 4 mA Electrical noise 2. 20 µg/√Hz Output impedance <100 Ω Bias output voltage 12 V DC Grounding Case isolated. Physical Dimensions See drawing Weight 90 g (3. 18 to 30 V DC 18 to 30 V DC Constant current diode 2 to 10 mA DC. nominal 30 kHz Transverse sensitivity ≤5% of axial Electrical Power requirements: Voltage source +24 V DC nominal. teflon jacket. internal shielding Environmental Temperature range –50 to +120 °C (–58 to +248 °F).2 (1 to 64) and are typical values referenced at +24 °C (+75 °F).) Specifications conform to ISA-RP-37.2 oz. and one (1) M8 x 1.0 Hz.) 145 g (5.00 metric thread. Mounting torque 2. 24 V DC supply.9 Nm (24 in.

3 mm (90 mil) with –24 V DC supply. DC to 600 000 CPM. weatherproof. Signal. down maximum of 3 dB at 10 kHz Driver signal output Impedance Minimum calibrated load resistance of 3kΩ.5 in.87 mV/micron (200 mV/mil) corresponding to –18 V DC at 2. output is protected against miswiring. cable same as CMSS 65 Eddy Current Probe.4 microns (1 mil) from best straight line over 1. and CMSS 665 or CMSS 665P Driver at +23 °C (+73 °F). Unless otherwise noted. the specifications apply to a complete CMSS 65 Eddy Current Probe System composed of: CMSS 65 Eddy Current Probe.) centers. A trim calibration adjustment on Driver provides a means for duplication of characteristics after replacement of any component. Note: Ex i regulations restrict upper limit to +100 °C Differential pressure To 4 bar (60 PSI) Materials Case 300 stainless steel Tip material RYTON Connectors Nickel plated stainless steel. which requires that probes.25 mm to 1.5 mil) from best straight line With zener barrier ±25. The CMSS 665P has a permanent fixed connector with same connection characteristics.25 mm to 2.5 mm (2. or the standard four number 10 clearance holes in a square on 63.15 mm (0. Three connections necessary per block (–24 V DC. These specifications may vary with different options and systems. 55 . sealable Cable Coaxial with Teflon insulation. CMSS 958 Extension Cable.15 mm (45 mil) range (Intrinsic Safety) Frequency range DC to 10 kHz. Mounting C-DIN Rail Mount which bolts onto Driver enclosure. high tensile and flexible strength Mounting Recommend minimum clearance of 1/2 Probe Tip diameter around the Probe Tip to maintain factory calibration Extension cable Temperature ranges. Voltage Nominal 7. Power supply requirements 15 mA from –24 V DC to –30 V DC Interchangeability Compliant to API-670. extension cables and drivers in 5 meter systems be interchanged with ±5% or less performance change without recalibration.87 mV/micron (200 mV/mil) With driver for 10 meter system 7. Probe Operating temperature range –34 to +177 °C (–29 to +350 °F).4 microns (1 mil) of best straight line over 2 mm (80 mil) range With driver for 10 meter system ±38 microns (1. GND.87 mV/micron (200 mV/mil) ±10% of 200 mV/mil Linearity Standard ±25. Signal). with a –24 V DC supply and target of AISI 4140 steel. CMSS 65 Eddy Current Probe System (page 48) Usable range Standard 2 mm (0. GND) Five terminal removable and reversible compression terminal block accepting up to 2 mm2 (14 AWG) wire. 80 mil (10 mil to 90 mil) With zener barrier 1.25 mm). Drivers Operating temperature range 0 to +65 °C (+32 to +149 °F) Connections (Power.4 mm) 45 mil (10 mil to 55 mil) (Intrinsic Safety) Sensitivity Standard 7. connectors.

high tensile and flexible strength. which requires that probes.0 mm).15 mm (45 mil) range (Intrinsic Safety) Frequency range DC to 10 kHz. Mounting Recommend minimum clearance of 1/2 Probe tip diameter around the Probe tip to maintain factory calibration.5 mil) from best straight line With driver for 15 meter system ±38 microns (1. cable same as CMSS 68 Eddy Current Probe.4 microns (1 mil) from best straight line over 1.) centers.5 mm (2. Unless otherwise noted. connectors. CMSS 958 Extension Cable. output is protected against miswiring.3 mm at +23 °C With driver for extended range ±25.3 mm (0.87 mV/micron (200 mV/mil) corresponding to –18 V DC at 2. These specifications may vary with different options and systems. 65 mil (10 mil to 75 mil) (Intrinsic Safety) Sensitivity Standard 7.9 mm).3 mm (90 mil) range With driver for 10 meter system ±38 microns (1. The CMSS 668P has a permanent fixed connector with same connection characteristics.3 mm (90 mil) with –24 V DC supply. Three connections necessary per block (–24 V DC. 145 mil (15 mil to 160 mil) With zener barrier 1. A trim calibration adjustment on Driver provides a means for duplication of characteristics after replacement of any component. Extension cable Temperature ranges.5 mm).87 mV/micron (200 mV/mil) ±10% of 200 mV/mil at +23 °C With driver for extended range 3. and CMSS 668 or CMSS 668P Driver at +23 °C (+73 °F). Signal. Note: Ex i regulations restrict upper limit to +100 °C Differential pressure To 4 bar (60 PSI) Materials: Case 300 stainless steel Tip material RYTON Connectors Nickel plated stainless steel. or the standard four number 10 clearance holes in a square on 63.25 mm to 1.5 mil) from best straight line over 2. Signal).6 mm (0. extension cables and drivers in 5 meter systems be interchanged with ±5% or less performance change without recalibration. 90 mil (10 mil to 100 mil) With driver for extended range 3. with a –24 V DC supply and target of AISI 4140 steel.25 mm to 2. Fault detection and sensors Technical data CMSS 68 SKF Eddy Current Probe System (page 50) Usable range Standard 2.87 mV/micron (200 mV/mil) With driver for 10 meter system 7.4 microns (1 mil) from best straight line over 3. Drivers Operating temperature range 0 to +65 °C (+32 to +149 °F) Connections (Power. sealable Cable Coaxial with Teflon insulation.5 in. the specifications apply to a complete CMSS 68 Eddy Current Probe System composed of: CMSS 68 Eddy Current Probe.87 mV/micron (200 mV/mil) ±10% of 200 mV/mil With driver for 15 meter system 7. weatherproof. Probe Operating temperature range –34 to +177 °C (–29 to +350 °F). down maximum of 3 dB at 10 kHz Driver signal output Impedance Minimum calibrated load resistance of 3 k Ω.6 mm (0.4 mm to 4. Mounting C-DIN Rail Mount which bolts onto Driver enclosure. GND) Five terminal removable and reversible compression terminal block accepting up to 2 mm2 (14 AWG) wire.94 mV/ micron (100 mV/mil) ±10% of 100 mV/mil at +23 °C Linearity Standard ±25. DC to 600 000 CPM. Voltage Nominal 7.4 microns (1 mil) of best straight line over 2. Power supply requirements 15 mA from –24 V DC to –30 V DC Interchangeability Compliant to API-670.6 mm at +23 °C With zener barrier ±25. 56 . GND.

Cables and enclosures   Cable CMSS 9100/9200 58   Cable assemblies CMSS R6Q/R6SL 59   Termination junction boxes CMSS 265 Series 60   BNC junction boxes CMSS 300 Series 61   Switchable BNC junction boxes CMSS 310 Series 62   Technical data 63 57 .

Description CMSS 9100-500 150 m (500 ft. Cables and enclosures Single/double shield twisted pair cable CMSS 9100/9200 Premium sensor cables provide superior performance in demanding environments CMSS 9100 CMSS 9200 The single shield cable is The double shield cable is recommended for use with sensors in recommended for use with sensors in normal industrial applications where industrial applications where there is a these types of cables have been high noise field (i. spool) single shield with continuous cable length CMSS 9200-500 150 m (500 ft. single twisted pair cable pair cable • Conductors individually insulated with • Conductors individually insulated DuPont FEP Teflon with DuPont FEP Teflon • A braided shield with drain wire • An inner shield of aluminum • An outer insulated jacket also made polyester foil with drain wire of clear DuPont FEP Teflon • An inner insulated jacket of • The cable is wrapped with a color DuPont FEP Teflon tape under the outer insulated jacket • A braided outer shield and has superimposed on the color • An outer insulated jacket also made tape a white marker tape with cable of clear DuPont FEP Teflon designation and SKF logo • The cable is wrapped with a color tape under the outer insulated jacket and also has superimposed on the color tape a white marker tape with cable designation and SKF logo Ordering details Order no. machine tools and previously used and installed. single twisted • A double shielded.e. spool) double shield with continuous cable length 58 . The CMSS 9100 features: The CMSS 9200 features: • Tin plated copper conductors • Tin plated copper conductors • Heat and flame resistance • Heat and flame resistance • A single shielded. power generating facilities). spool) single shield with continuous cable length CMSS 9100-1000 300 m (1 000 ft.

Commission). Description without SKF logo and is only available CMSS 932 Two-wire twisted pair cable/connector assembly non-isolated. the CMSS 933 is a three wire cable The IP rating refers to the Ingress The IP 68 stainless steel connectors connector assembly.Cable assemblies CMSS 932/CMSS 933 Connector and cable assemblies for vibration sensors CMSS 932 and CMSS 933 • Two levels of dust and water ingress rugged for application in industrial The CMSS 932 is a two wire and protection (IP64 and IP68) environment. the shield is always con- CMSS 933 Three-wire twisted triad cable/connector assembly nected to the sensor body. 20 meter length Note: Ordering details The IP 64 connector/cable assembly always features the standard boot Order no. and a water There are two cable (jacket) colors • Rugged. IP 68 connector. Both have the Protection as defined by the IEC are also protected by a “rubber boot” same basic characteristics: (International Electrotechnical with SKF molded logo for easy vendor • For use with the SKF range of vibra. tion sensors protection against dust. twist IP 64 connector/cable assembly with standard build (no logo) (CMSS 932-64SBN-XX-XXX) lock. isolated. economical sealing that can withstand submersion available: up to 1 meter when connector • Yellow – for high visibility in the dusty • Shielding for low-voltage dynamic and mating connector on sensor and dirty industrial environments vibration signals is assembled with silicon grease. yellow cable. double shielded. CMSS 932/933 Pins IP Rating STYLE Isolation Shielding CABLE (Jacket) colour Length Two pin connector 2 IP 64 Connector 64 Standard build SB Non-isolated N Double shielded D Yellow jacket Y 5 meters 5M Three pin connector 3 (splashproof) Isolated I Single shielded S Blue jacket B 10 meters 10M IP 68 Connector 68 Twist Lock TL 20 meters 20M (immersion) Locking Collar LC Specify xx meters xxM 59 . IP 68 indicates total identification. • Temperature range: –80 to +200 °C • Blue – for use in intrinsically safe cir- IP 68 cable connector assemblies are (–112 to +392 °F) cuits in the Oil/Gas and Hydrocarbon processing industries IP 68 sensor connector cable assembly with IP 68 sensor connector cable assembly with twist lock (CMSS 932-68TLX-XX-XXX) locking collar (CMSS 932-68LCX-XX-XXX) System ordering example for CMSS 932 Connector/cable assembly: CMSS 932-68TLI-DY-20M Two-wire twisted pair/two pin connec- tor assembly.

3 x 15. and shield) are provided for the intermediate termination of accelerometers. 20. tight seal.) -16 16 channels. 6 terminals. 24 terminals.2 cm (6 x 6 x 4 in. Screw covers are secured in-place gasket provides a water and with captivated monel cover screws.2 cm (6 x 6 x 4 in.2 x 15. temperature resistance and physical foam in-place gasket provides a water They feature continuously welded properties.3 x 15.2 x 15.4 x 20. Crew clamp. RTD’s. 48 terminals. Stainless steel screws and clamps are included.2 x 10. 35.3 cm (14 x 12 x 8 in. seems that are ground smooth with gasket provides a watertight and dust no holes or knockouts.2 x 10. 12 terminals. An oil-resistant. A seamless resistant in corrosive environments.) Ordering example NEMA 4 Powder coated steel junction box with 4 channels and 12 terminals would be SKF Order no. proximity probes. Cables and enclosures Termination junction boxes CMSS 265 series Connecting centers by SKF The CMSS 265 series termination junction boxes are multiple channel connecting centers for terminating the outputs of accelerometers or other transducer field wiring.2 cm (10 x 8 x 6 in.5 x 20. and other transducers. 36 terminals. This enclosure is more drilled.) -08 8 channels. 15. speed sensors. 15. NEMA 4X Fiberglass NEMA 4 Powder coated steel NEMA 4X Stainless steel termination junction boxes termination junction boxes termination junction boxes CMSS 265FG CMSS 265PS CMSS 265SS The CMSS 265FG NEMA 4X enclosures The CMSS 265PS NEMA 4 enclosure The CMSS 265SS NEMA 4X enclosure are made of molded fiberglass is constructed of 14 gauge mild steel is constructed from 14 gauge 304 polyester which is easily punched or and is ANSI 61 gray polyester powder stainless steel. Ordering details Order no.) -12 12 channels. A seamless foam in-place and dust tight seal. Size Description.2 cm (8 x 6 x 4 in. DIN-rail mounted terminals (three inputs per channel. It has outstanding chemical and coated on the all surfaces.2 x 10.) -04 4 channels. common.6 x 30. dust tight seal. 25. CMSS 265PS-04. usually signal. 60 . height x width x depth CMSS 265FG -XX NEMA 4X Fiberglass junction box CMSS 265PS -XX NEMA 4 Powder coated steel junction box CMSS 265SS -XX NEMA 4X Stainless steel junction box -02 2 channels.

) properties.5 x 5. -02 External BNC Ordering example NEMA 4 Power coated steel BNC junction box with 4 channels and an external BNC would be SKF Order no. • More room for wiring and conduit entry • Short connections for less noise • Large Monel screw type terminals • Quick and convenient access to NEMA 4 Powder coated steel NEMA 4X Stainless steel remotely installed accelerometers BNC junction boxes BNC junction boxes with portable data collector/analyzer CMSS 300PS CMSS 300SS • Withstands harsh factory and The CMSS 300PS powder coated The CMSS 300SS NEMA 4X stainless outdoor environments steel NEMA 4 enclosure is constructed steel enclosure is constructed from Internal models are provided with quick of 14 gauge mild steel and is ANSI 61 14 gauge 304 stainless steel.25 in.0 in. In harsh Ordering details environments.0 in.25 in.8 cm (6. A seamless foam in-place -02 2 Channels.) gasket provides a water and dust tight -04 4 Channels. Size BNC Description.5 x 7.5 x 6.25 in.0 x 3.0 x 4.5 in.) switch identification.5 x 7.0 x 4.6 x 16.6 x 16. They are normally located in close proximity to the machine to reduce wiring cost and provide convenient access to the vibration signal when using a portable data collector/analyzer.0 x 3.) The CMSS 300FG NEMA 4X enclosure -02 2 Channels.) NEMA 4X Fiberglass -06 6 Channels. 19.1 x 17.1 x 17.5 x 10.2 cm (7.0 x 4. 16.8 x 10.5 x 10. -02 2 Channels.0 x 4.5 x 16.) -04 4 Channels.2 cm (7.5 x 6.8 x 10.) is made of molded fiberglass polyester -04 4 Channels.5 in.8 x 10.8 cm (6. caps for the BNC fitting.) seal.0 in.8 cm (8.8 x 8.0 in. Screw covers are secured with -06 6 Channels.5 x 7.8 cm (8.5 x 16.5 x 4.1 x 17. -06 6 Channels.0 in. 24. access latches and external models gray polyester powder coated on with screw covers and protective all surfaces. 21.5 x 5. 19.7 x 10.1 x 12.) BNC junction boxes CMSS 300PS -XX -XX NEMA 4 Powder coated steel BNC junction box CMSS 300FG -01 1 Channel. 16.5 x 7.5 x 4. 19.8 x 8.9 cm (9. Black and white bezel CMSS 300FG -XX -XX NEMA 4X Fiberglass BNC junction box tagging is provided for channel and -01 1 Channel. CMSS 300 PS-04-02 61 . height x width x depth be specified. 24.5 x 6.) It has outstanding chemical and CMSS 300SS -XX -XX NEMA 4 Stainless steel BNC junction box temperature resistance and physical -01 1 Channel.5 x 4.2 cm (7. 24.) which is easily punched or drilled.5 x 10.1 x 17.5 x 4. 24.0 x 4. internal models should Order no.BNC junction boxes CMSS 300 series Easy to use high quality products The CMSS 300 series BNC junction boxes are multiple channel connecting centers for terminating the outputs of accelerometers or other transducer field wiring.7 x 10.5 x 7.0 in.1 x 17.5 x 7. 21.9 cm (9.2 cm (9. 19.1 x 17.2 cm (9.5 x 10.2 cm (7.) -01 Internal BNC captivated Monel cover screws.0 x 4.1 x 12.5 x 6.8 x 10.25 in.

Black and white of 14 gauge mild steel and is ANSI 61 14 gauge 304 stainless steel.5 x 15 x 6 in. Ordering example NEMA 4 Powder coated switchable BNC junction box with 32 channels and an internal BNC would be SKF Order no.4 x 33.5 x 38. CMSS 310PS-32-01. Internal models switchable BNC junction boxes switchable BNC junction boxes are provided with quick access latches. quick.2 cm (17. 24.) for Stainless steel version. switch module (front panel) can be disconnected from the back board • Large Monel screw type terminals Both internal and external switch/BNC NEMA 4 Powder coated steel NEMA 4X Stainless steel models are available. 62 . It has outstanding chemical and CMSS 310PS -XX -XX NEMA 4 Powder coated steel switchable BNC junction box temperature resistance and physical CMSS 310SS -XX -XX NEMA 4X Stainless steel switchable BNC junction box properties.5 in. • RoHS compliant • Easier wiring.9 cm (9.5 x 13 x 6 in.9 cm (9. They are installed in a location as close to the machine as practical to reduce wiring cost and yet provide convenient.) captivated Monel cover screws.2 cm (15. safe access to the vibration signal by an operator with a portable data collector/ analyzer.5 x 38.8 x 8. Screw covers are secured with -24 24 Channels. 24.1 x 15. 39.1 x 17. 44.5 in. A seamless foam in-place -06 6 Channels. and safe The CMSS 310 series switchable BNC junction boxes are designed for terminating and switching the outputs of up to 48 accelerometers.5 x 7 x 3. bezel tagging is provided for channel gray polyester powder coated on all and switch identification.)* gasket provides a water and dust tight -12 12 Channels. and external models with screw covers (PS) CMSS 310PS CMSS 310SS and protective caps for the BNC fitting. internal models coated steel enclosure is constructed steel enclosure is constructed from should be specified.2 cm (17.1 x 15. NEMA 4X Fiberglass switchable BNC junction boxes (FG) CMSS 310FG The CMSS 310FG NEMA 4X fiberglass Ordering details enclosure is made of molded fiberglass Order no. height x width x depth polyester which is easily punched or CMSS 310FG -XX -XX NEMA 4X Fiberglass switchable BNC junction box drilled. The CMSS 310PS NEMA 4 powder The CMSS 310SS NEMA 4X stainless In harsh environments. 44.) -48 48 Channels.2 cm (4 in.5 x 15 x 6 in.5 x 7 x 3.8 x 8. Size BNC Description.1 x 17.)* seal.0 x 15.) -01 Internal BNC -02 External BNC * Dimensional depth is 10. -32 32 Channels. surfaces. Cables and enclosures Switchable BNC junction boxes CMSS 310 series Convenient.

includes glass fillers for roundness Wire materials All conductors.52 mm2 (20 AWG) (American Wire Gauge) Color code Black and white pair. cable color is yellow with white SKF label Outer jacket diameter 4. size 0.) Voltage rating 600 V RMS Working temperature range –80 to +200 °C (–112 to +392 °F) Heat and flame resistance Meets requirements of UL 910 Stiner Tunnel test 63 .Technical data Single/double shield twisted pair cable (page 58) Designation Description Conductors Tin plated copper. (±0.190 in.005 in. 19 x 32 strands.127 mm).). 0.826 mm (±0. drain wires and braided shields are of tin plated copper Capacitance Approximately 89 pF/m (27 pF/ft.

Cables and enclosures 64 .

Reliability Maintenance Institute Training Benefits and structure of training 66 Course categories 67 SmartStart product training 67 Reliability Maintenance Institute On-line 68 65 .

productivity classroom and mentoring to reach • Enhance plant safety the learning objectives. Training Reliability Maintenance Institute training Equip your people to deliver results The Reliability Maintenance Institute is your resource to help meet challenging business targets. Unique learning environments Course levels The Reliability Maintenance Institute offers a mix of course types and Advanced Advanced training delivered by SKF specialists venues to meet your specific training needs. It uses an array • Increase machine uptime and of technologies such as on-line. bringing the subject matter closer to you. Benefits of training Blended learning The SKF reliability • Achieve higher levels of personnel Our established classroom training and maintenance portfolio and machine efficiency approach is now complemented with structure • Eliminate machinery problems to a package of self-study materials with The course portfolio is designed increase reliability and productivity selected on-line courses and reference around the SKF Asset Efficiency material. • RMI classroom and regional classroom Introductory e-learning delivered via the internet • On-site classroom courses and customized training • Web-based courses Course categories Maintenance Work Work Work • Computer based training Strategy Identification Control Execution • Mentoring Living program (continual improvement) 66 . A key focus area is to manage the total cost of ownership by increasing machine reliability and uptime. To leverage your invested capital in machinery and equipment. On-site training is available at your plant or facility and many classes are held at SKF training centers and Intermediate Classroom / onsite delivered by local SKF trainers other regional locations. it is essential to continuously develop your people as you increase efficiency and productivity.aptitudexchange.com) participants to gain the knowledge • Reduce accidental damage or and expertise in a structured under-utilization of equipment development path. These materials are accessed Optimization (AEO) workflow process • Determine and fix the root cause of via the @ptitude Exchange website and has been created to allow machine and component problems (http://www.

Description and logistics. the instructor will offer strategy. spare parts alignment. The training is and Cement Industries WI322 Airborne Ultrasound-Level II designed to take the form of mentoring WE214 Bearing Reliability in Paper Machines WICM350 Advanced Microlog & Machine Analyst rather than traditional classroom WE216 Machine Tool Reliability instruction. LP 200 Root Cause Analysis Course no. MS332 Reliability Centered Maintenance Course topics include maintenance planning and scheduling. Description Level I MS212 Managing Proactive Reliability continued on next page WE303 Advanced Lubrication Maintenance Programs MS230 Maintenance Strategy Review MS241 Asset Management Support Tool Work Control MS300 Asset Reliability Improvement Relates to methods and technologies MS331 Maintenance Strategy Review used to control maintenance work. WE250 Precision Field Balancing predictive maintenance requirements. It is process: information integration and decision designed to get that product up and Work Execution support systems. Relates to methods and technologies start-up training RMI training courses are organized to used to identify maintenance work.Course categories Work Identification SmartStart on-site product While specific course topics vary widely.Part 1 insightful. WI205 Vibration Troubleshooting for Reliability plant’s machinery WI210 Vibration Analysis ISO Category I Course no. your employees trained. Courses emphasize a technically WE241 Precision Maintenance Skills . Description and effectively. pragmatic information that and financially sound maintenance strat- WE242 Precision Maintenance Skills . a specific product or system. best practices in Category 1 (BINDT Accredited) • Small class size lubrication. Course topics include precision WI202 ISO 18436 Part 2 Vibration Analysis maintenance. Description LP 390 SiteMentor WC200 Planning & Scheduling OEM301 Bearing System Design WC230 Spare Parts OSHA 10 OSHA 10 hour safety program 67 . to develop a comprehensive maintenance WE240 Precision Laser Alignment Furthermore. precision WI203 ISO 18436 Part 2 Vibration Analysis • Individual instruction alignment. and post Category 2 (BINDT Accredited) • Field exercises on your maintenance testing. and supply Course no. standard job Specialty courses plans. and your program implemented quickly Relates to methods and technologies Course no. balancing. Description WI211 Vibration Analysis ISO Category II • Standardized plant-wide procedures WE201 Bearing Maintenance and Technology WE202 Bearings in Rotating WI212 Vibration Analysis ISO Category III How is SmartStart training Machinery Applications WI213 Vibration Analysis ISO Category IV conducted? WE203 Lubrication in Rolling WI304 Advanced Vibration Analysis SmartStart instructors will provide you Element Bearings WI305 Applied Modal and Operating with real world application expertise WE204 Root Cause Bearing Damage Analysis Deflection Shape Analysis by using your actual plant applications WE212 Bearing Reliability for the Aggregate WI321 Airborne Ultrasound-Level I and requirements. WE291 Aeroengine Bearing Inspection: Course no. SmartStart is an on-site product match the following facets of the SKF Course topics include preventive startup service that focuses on Asset Efficiency Optimization workflow maintenance. and work order running. request generation. predictive technologies. WE220 Wind Turbine Shop Bearing Maintenance Maintenance Strategy The site instructor will offer guidance WE221 Wind Turbine Uptower in applicable product and/or database Relates to methods and technologies used Bearing Maintenance optimization and functionality. installation. used to complete maintenance WI201 Fundamentals of Machine Condition Benefits of SmartStart training tasks.Part 2 will provide you with powerful tools for egy developed to match business goals.

(Part # AEX-RMI) MT-MV1B1 SKF MicroVibe training conducted? Training is conducted at your site. Description WICM232 Marlin and Aptitude Analyst Inspector Learn at your own place and pace. Description access to all listed courses for one year PT-MCA1 SKF Machine Condition Advisor Where is SmartStart per person. expanding range of e-learning courses WE 170 Basics of Industrial Seals See page 32 for details. SmartStart is WI 130 Thermography Basics • Tuition costs priced to include up to five participants WI 140 Lubrication Analysis Basics (there is an extra charge for more • Registration information participants). MS 101 Assessment Basics Visit www. Training SmartStart courses Reliability Maintenance Work Execution courses Course no. They are designed to complement the GRB 004 CARB Toroidal Roller Bearings See page 35 for details. prerequisites and length WI 100 Vibration Basics of course and start-up assistance. Description See pages 33 and 34 for details.) These e-learning courses are an GRB 001 Bearing Basics WICM264  X Series Microlog and A integral part of Reliability Maintenance GRB 002 Spherical Roller Bearings SKF @ptitude Analyst Institute’s extensive training portfolio. Description Institute On-line Course no.) higher level courses that are delivered GRB 005 Tapered Roller Bearings WICM271  KF Copperhead Series S by our specialist training staff. on-site consulting. Description to five training kits. Maintenance Strategy courses in your training facility.skf. This enables for Rotating Motion WICM263  X Series Microlog and G self-paced learning to be enjoyed by SKF @ptitude Analyst the participant at the time and place General reference courses (included in the Microlog Analyzer GX-E and GX-M bundled packages. Description WC 130 Spare Parts Management Ordering details Order no.) covering a range of topics. up • Course syllabus including objectives. (included in the Microlog Analyzer GRB 003 Angular Contact Ball Bearings AX-M bundled package. RMI On-line GRL 001 Lubrication Basics WICM272 IMx System and Aptitude Observer courses are structured according to WE255 Balancing with an SKF Microlog the five facets of SKF’s Asset Efficiency WE245 TMEA Series Laser Shaft Alignment Optimization process. WE 104 Bearing Damage Analysis Basics WICM253  X Series Microlog and M The on-line area of Reliability WE 140 Shaft Alignment Basics System Software Maintenance Institute offers an WE 150 Balancing Basics (included in the Microlog Analyzer MX bundled package. using your Course no. Course no. for one individual 68 .com or your local SKF What’s included in MS 120 Operator Driven Reliability representative for the complete details SmartStart training? MS 130 Maintenance Strategy Review about SKFs training offering including: SmartStart training packages include • Current training catalogue a qualified SKF instructor. Description computers and SKF purchased MS 100 AEO Basics For more information hardware and/or software. all travel and Work Identification courses • Course schedules and locations living expenses for the instructor. • Instructor profiles Work Control course Course no. Product courses An RMI on-line subscription includes Course no. Like GRB 006 Deep Groove Ball Bearings On-line System RMI’s classroom training. that best suits their situation. description. Description AEX-RMI One year Reliability Maintenance Institute on-line subscription. Course no.

36 – Assemblies. Eddy probe system. Microlog Analyzer GX-M 34 37 Data collectors /analyzers. Thermal 13 24 Clamps. Copperhead fault detection systems 41 52 Energy monitoring kit 19 – Extension cable. 5 mm 48 55 Driver. 5 mm 48 55 Eddy probe system. Microlog Analyzer AX 35 37 Data collectors /analyzers. Copperhead 40 52 H Hioki Clamp-on Power Meter 19 26 Hioki Power Meter Clamps 20 27 I Industrial accelerometers.Index Description Page no. Eddy probe system. general purpose 45 54 Infrared Thermometer 12 24 Inspector 400 Ultrasonic Probe 14 25 continued on next page 69 . 8 mm 50 56 F Fault detection systems. Hioki Power Meter 20 27 Copperhead fault detection systems 40 52 D Data collectors /analyzers overview 30 37 Data collectors /analyzers. cable 59 – B Basic condition monitoring kit 18 – Bearing assessment kit 17 – BNC junction boxes 61 – C Cable assemblies 59 – Cables 58 58 Camera. Technical data A Accelerometers. SmartStart product training 67 – Display/alarm module. Eddy probe system. general purpose industrial 45 54 Analysis modules 31. Product Support Plan 36 – Data collectors /analyzers. Microlog Analyzer GX-E 33 37 Data collectors /analyzers. Microlog Analyzer MX 32 37 Data collectors /analyzers. Eddy probe system. 8 mm 50 56 E Eddy probe system. Copperhead fault detection systems 41 52 Driver. 8 mm 50 56 Eddy probe systems overview 46 – Electric motor assessment kit 16 – Electrical Discharge Detector Pen 15 25 Enclosures. 5 mm 48 55 Extension cable.

Switchable BNC 62 – Junction boxes. Infrared 12 24 Training overview 66 – Training. OilCheck 17 25 O OilCheck monitor 17 25 P Pen. Basic condition monitoring 18 – Kit. BNC 61 – Junction boxes. Data collectors /analyzers 36 – R Reliability Maintenance Institute On-line 68 – S Sensors. Copperhead fault detection systems 41 52 U Ultrasonic Probe. Reliability Maintenance Institute On-line 68 – Training. Eddy probe system. Bearing assessment 17 – Kit. Electric motor assessment 16 – Kit. loop-powered 43 53 70 . Energy monitoring 19 – L Loop-powered vibration transmitters 43 53 M Machine Condition Advisor 6 21 Machine Condition Detector Pro IS 8 22 Microlog Analyzer AX 35 37 Microlog Analyzer GX-E 33 37 Microlog Analyzer GX-M 34 37 Microlog Analyzer MX 32 37 MicroVibe P 10 22 Modules. 8 mm 50 56 Product Support Plan. Copperhead fault detection systems 41 52 SmartStart product training 67 – Switchable BNC junction boxes 62 – T Termination junction boxes 60 – Thermal Camera 13 24 Thermometer. SmartStart 67 – Transmitters.Index Description Page no. Analysis 31. 5 mm 48 55 Probe. Inspector 400 14 25 V Vibration transmitters. 36 – Monitor. Termination 60 – K Kit. Electrical Discharge Detector 15 25 Power Meter. Eddy probe system. Hioki Clamp-on 19 26 Probe. Technical data J Junction boxes.

71 .

These platforms approved for quality certification in accord- include bearings. critical With over 100 manufacturing sites world- © Airbus – photo: exm company. SKF also holds knowledge engineering company. distribution system put SKF close to cus. but extend to other areas including: specific requirements. we stand an increasingly important position in the ready to serve you with world-class product market for linear motion products. Individual divisions have been solutions for its customers. lubricants and lubrication systems. of ance with ISO 9001 and other customer course. wire. some 15 000 locations around the world. In essence. virtually all aircraft of the Airbus design use SKF toring and reliability systems. manufacture and marketing of need them. and a full range of services. and precision aerospace bearings. as well as OHSAS engineering company that is able to draw on 18001. our distributors and dealers in SKF has a unique expertise in the fast-growing by- wire technology. In Evolving by-wire technology electronics knowledge into systems for more addition. as well as complementary corporation are stronger than ever. mechatronics that combine mechanical and SKF is a truly international corporation. Though the scope has broadened. to drive-by- effective linear motion and sensorized solu. which employ SKF mechatronics for steering and braking. machine tool the vision to help you succeed. SKF pioneered practical fly- tions. competencies. and has partnered with automotive engin- eers to develop two concept cars. to work-by-wire. from de. The SKF Group is globally certified to ISO aligning ball bearing more than 100 years 14001. SKF services. spindles and plant maintenance services. Goussé for long bearing life in many applications. As an example. SKF has evolved into a knowledge onmental management. Bearings Lubrication Seals and units systems Mechatronics Services 72 . from fly-by-wire. with all aerospace industry leaders. which uses mecha- tronics rather than hydraulics for all controls. SKF solutions are avail- continues to maintain the world’s leadership able wherever and whenever customers in the design. the SKF brand and the rolling bearings. SKF is also a leader in automotive by-wire tech- nology. Overall. intellectual resources.SKF – the knowledge engineering company From the company that invented the self. bearing units and seals. wide and sales companies in 70 countries. Fur- ther by-wire development has led SKF to produce an all-electric forklift truck. As the products such as radial seals. H. the international standard for envir- ago. tomers for the supply of both products and by-wire systems for cockpit flight control. the health and safety management five technology platforms to create unique standard. high. an e-business marketplace and a global by-wire technology and is a close working partner sign and logistics support to condition moni.

bearings make a positive contribution to the natural environment. SKF is working closely with global industry leaders to develop efficient and trouble-free turbines. By raising the performance bar for our own products. Planning for sustainable growth By their very nature. as well as the manufacturing techniques. Formula One car racing provides a unique environment for SKF to push the limits of bearing technology. SKF works closely with appliance manufacturers to improve their prod- ucts’ performance.Harnessing wind power The growing industry of wind-generated electric power provides a source of clean. (The average racing Ferrari utilizes around 150 SKF components. engineering and knowledge have helped make Scuderia Ferrari a formid- able force in F1 racing. With an eye to the future and the world we will leave to our children. enabling machinery to operate more efficiently. and require less lubrication. Maintaining a 350 km/h R&D lab In addition to SKF’s renowned research and development facilities in Europe and the United States. Developing a cleaner cleaner The electric motor and its bearings are the heart of many household appli- ances. some industrial facilities opt for an Integrated Maintenance Solution. reduce weight. For over 60 years. For example. performance-based contract. health and safety. SKF knowledge in the area of small bearing technology is also applied to manufacturers of power tools and office equipment. highly specialized bearings and condition monitoring systems to extend equip- ment life of wind farms located in even the most remote and inhospitable environments. 73 . engineering assistance and machine reliability programmes. are planned and implemented to help protect and preserve the earth’s limited natural resources. SKF products are at work in diverse environments such as baking ovens and instant freezing in food processing plants. whether hot or cold. especially in northern countries.) Lessons learned here are applied to the products we provide to automakers and the aftermarket worldwide. We remain committed to sustainable. environmentally responsible growth. SKF is enabling a new generation of high-efficiency products and equipment. from condition monitoring hardware and software to maintenance strategies. and reduce energy consumption. the SKF Group policy on environment. SKF created a new family of synthetic lubricants formulated to retain their lubrication viscosity even at these extreme temperatures. SKF knowledge enables manufacturers and end user customers to overcome the performance issues resulting from extreme temperatures. consume less power. SKF prod- ucts. extreme sub-zero tempera- tures can cause bearings in railway axleboxes to seize due to lubrication star- vation. A recent example of this cooperation is a new generation of vacuum cleaners with substantially more suction. in which SKF delivers all services under one fixed-fee. To optimize efficiency and boost productivity. providing a wide range of large. SKF provides a comprehensive range of asset efficiency products and services. Delivering Asset Efficiency Optimization Through SKF Reliability Systems. green electricity. Working in extreme environments In frigid winters. cut costs.

Windows CE. Fisher. OSIsoft PI. indirect or consequential arising out of the use of the information contained herein. and Marvel are all trademarks of their respective owners. Printed in Sweden on environmentally friendly paper. @ptitude. SAP. Hioki. Windows. HP.® SKF. Motorola. RMI.com . and OilCheck are trademarks of the SKF Group. and Reliability Maintenance Institute are registered trademarks and Copperhead. Maximo. RMI On-line. DuPont FEP Teflon. PUB SR/P1 10549 EN · April 2010 This publication supersedes publication 710-800. RYTON. Microlog. Excel. Freescale. Microsoft. skf. Hewlett Packard. Intel. © SKF Group 2010 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct. Windows Mobile. SmartStart.