You are on page 1of 1

Hardware Installation If you access Internet by ADSL, please comply with step 1, 2, 3 and 4 in below diagram in correct order;

if you access Internet by
residential broadband, please comply with step 2, 3 and 4 to connect the WAN port of your router with the residential broadband directly.

Quick Installation Guide
LED Indicators
AC1200 Wireless Dual Band Gigabit Router POWER This indicator lights blue when the router powered on, otherwise it is off.

CPU When the router powered on, this indicator keeps lighting blue.

2.4G This indicator lights blue when the 2.4G wireless connection enabled.
Suitable for: A3002RU
5G This indicator lights blue when the 5G wireless connection enabled.

Telephone Wire
When the WAN port is connected successfully the indicator lights blue.
WAN
While transmitting or receiving data through the WAN port the indicator
blinks blue.

When the LAN port has a successful connection, the indicator lights blue.
1/2/3/4LAN
While transmitting or receiving data through the LAN port the indicator
blinks blue.
USB This indicator lights blue when you have plugged a USB device on the router.

Router

NOTE:
1. Please disconnect the power adapter and all cables during
thunderstorm weather;
2. Keep away from heat source and keep well ventilated;
V1.15.11 Network
Cable 3. Please pay attention to the waterproofing and moisture-proof
Copyrights by TOTOLINK All rights reserved. Website: http://www.totolink.net Telephone Telephone when storing, transporting and running.
Wire Wire
Information in this document is subject to change without prior notice. 4. The power supply must reach the rated current and power.
Network 5. Put the router in flat places.
Cable

Set Up PC
Windows 7 For Windows Vista or Windows 7 Operating System, please comply with following steps to set up. Windows 8 For Windows 8 Operating System, please comply with following steps to set up.

Right click “Internet” on desktop, choose Double-click “Internet Protocol Choose “Obtain an IP address automatically” Click “Start—Control Panel—Network and Double-click “Internet Protocol Version 4 Choose “Obtain an IP address automatically”
“Properties”—Change Adapter Settings, Version 4 (TCP/IPv4)” and “Obtain DNS server address automatically”, Sharing Center—Change adapter setting”, (TCP/IPv4)”. and “Obtain DNS server address automatically”,
then right click “Local Area Connection”, click “OK”; go back to previous interface and right-click “Ethernet”, and choose “Properties”. click “OK”; go back to previous interface and
choose “Properties” click “OK” click “OK”.

Set Up Router Wireless Network Connection
Please set up the router following below steps.
Run the Web browser.

Here we take PPPoE as an example. User Name and Password are
required.

Right-click “My Network
Places”, click “Properties”
Input the encrytion key and click “Connect”
Type 192.168.1.1 in the Web Browser address bar, then press Enter key.
Confirm the wireless network SSID name,
choose one that you would like to connect,
then click “Connect”

Input the User Name and Password, then click Login button
7 For 5G Wireless Settings, you can setup SSID (network name) and
encryption.

(The default Username and Password is admin).

Right-click “Wireless Network
Connection”, and click “View
Available Wireless Networks”
Have connected wireless network, you can access
Internet through wireless mode.

By default, no encryption selected. Here WPA2 Mixed is recommended
8 for you to protect your network, then type in your password.

5 FAQ
11 Wait for a while, Internet connected successfully! Please click finish.

Now you have logged into the Easy Setup interface.

How to reset the router to default settings?

1. Please make sure your router’s power is on regularly, then press the
9 You can setup the 2.4G Wireless Setting referring to 5G Wireless Setting. RST button for about 10s.

2. Loosen the button until your router’s LED lights all flashing, then you
have reset your router to default settings.

Forget the password?

Please reset your router to default settings firstly, and set a new password.
Now the router’s Status interface turns up, it shows connected type and The default Username and Password is admin.
12 IP address & DNS you get. The default IP is 192.168.1.1.

On this page, you can also enable or disable IPTV. If enable this function,
10 please enter the VLAN ID and choose correct IPTV port. Then click Apply
to save the settings.

Choose the WAN connection type and enter the parameters provided
by your ISP.

For more information, please go to www.totolink.net