You are on page 1of 4

[OK

]
Erase of nvram: complete
%SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram
PoliceDept# reload
Proceed with reload? [confirm]
System Bootstrap, Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.
Total memory size = 512 MB - On-board = 512 MB, DIMM0 = 0 MB
CISCO1941/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64/-1(On-board/DIMM0) bit mode with ECC disabled
Readonly ROMMON initialized
program load complete, entry point: 0x80803000, size: 0x1b340
program load complete, entry point: 0x80803000, size: 0x1b340
IOS Image Load Test
___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x2bb1c58
Self decompressing the image :
########################################################################## [OK]
Smart Init is enabled
smart init is sizing iomem
TYPE
MEMORY_REQ
HWIC Slot 0
0x00200000
HWIC Slot 1
0x00200000
Onboard devices &
buffer pools
0x01E8F000
----------------------------------------------TOTAL:
0x02E8F000
Rounded IOMEM up to: 48Mb.
Using 6 percent iomem. [48Mb/512Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4, REL
EASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thurs 5-Jan-12 15:41 by pt_team
Image text-base: 0x2100F918, data-base: 0x24729040
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco CISCO1941/K9 (revision 1.0) with 491520K/32768K bytes of memory.
Processor board ID FTX152400KS
2 Gigabit Ethernet interfaces
4 Low-speed serial(sync/async) network interface(s)
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
249856K bytes of ATA System CompactFlash 0 (Read/Write)
--- System Configuration Dialog --Continue with configuration dialog? [yes/no]: no
Press RETURN to get started!

Router>en
Router# conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# hostname PoliceDept
PoliceDept(config)# no ip
PoliceDept(config)# no ip domain
PoliceDept(config)# no ip domain-lookup
PoliceDept(config)#enable secret cisco
PoliceDept(config)#line con 0
PoliceDept(config-line)#logging-s
PoliceDept(config-line)#logging
PoliceDept(config-line)#logging synchronous
PoliceDept(config-line)#password class
PoliceDept(config-line)#login
PoliceDept(config-line)#exit
PoliceDept(config)#line vty 0
PoliceDept(config-line)#line vty 0 4
PoliceDept(config-line)#password class
PoliceDept(config-line)#login
PoliceDept(config-line)#exit
PoliceDept(config)#service pass
PoliceDept(config)#service password-encryption
PoliceDept(config)#b
PoliceDept(config)#ban
PoliceDept(config)#banner mo
PoliceDept(config)#banner motd #Bienvenido a Policedept#
PoliceDept(config)#int serial0/0/0
PoliceDept(config-if)#ip ad
PoliceDept(config-if)#ip address 192.168.10.105 255.255.255.252
PoliceDept(config-if)#no sh
PoliceDept(config-if)#
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
PoliceDept(config-if)#de

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
PoliceDept(config-if)#desc
PoliceDept(config-if)#description to Central Router
PoliceDept(config-if)#do sh cont s0/0/0
Interface Serial0/0/0
Hardware is PowerQUICC MPC860
DTE V.35 TX and RX clocks detected
idb at 0x81081AC4, driver data structure at 0x81084AC0
SCC Registers:
General [GSMR]=0x2:0x00000000, Protocol-specific [PSMR]=0x8
Events [SCCE]=0x0000, Mask [SCCM]=0x0000, Status [SCCS]=0x00
Transmit on Demand [TODR]=0x0, Data Sync [DSR]=0x7E7E
Interrupt Registers:
Config [CICR]=0x00367F80, Pending [CIPR]=0x0000C000
Mask [CIMR]=0x00200000, In-srv [CISR]=0x00000000
Command register [CR]=0x580
Port A [PADIR]=0x1030, [PAPAR]=0xFFFF
[PAODR]=0x0010, [PADAT]=0xCBFF
Port B [PBDIR]=0x09C0F, [PBPAR]=0x0800E
[PBODR]=0x00000, [PBDAT]=0x3FFFD
Port C [PCDIR]=0x00C, [PCPAR]=0x200
[PCSO]=0xC20, [PCDAT]=0xDF2, [PCINT]=0x00F
Receive Ring
rmd(68012830): status 9000 length 60C address 3B6DAC4
rmd(68012838): status B000 length 60C address 3B6D444
Transmit Ring
tmd(680128B0): status 0 length 0 address 0
tmd(680128B8): status 0 length 0 address 0
tmd(680128C0): status 0 length 0 address 0
tmd(680128C8): status 0 length 0 address 0
tmd(680128D0): status 0 length 0 address 0
tmd(680128D8): status 0 length 0 address 0
tmd(680128E0): status 0 length 0 address 0
tmd(680128E8): status 0 length 0 address 0
tmd(680128F0): status 0 length 0 address 0
tmd(680128F8): status 0 length 0 address 0
tmd(68012900): status 0 length 0 address 0
tmd(68012908): status 0 length 0 address 0
tmd(68012910): status 0 length 0 address 0
tmd(68012918): status 0 length 0 address 0
tmd(68012920): status 0 length 0 address 0
tmd(68012928): status 2000 length 0 address 0
tx_limited=1(2)
SCC GENERAL PARAMETER RAM (at 0x68013C00)
Rx BD Base [RBASE]=0x2830, Fn Code [RFCR]=0x18
Tx BD Base [TBASE]=0x28B0, Fn Code [TFCR]=0x18
Max Rx Buff Len [MRBLR]=1548
Rx State [RSTATE]=0x0, BD Ptr [RBPTR]=0x2830
Tx State [TSTATE]=0x4000, BD Ptr [TBPTR]=0x28B0
SCC HDLC PARAMETER RAM (at 0x68013C38)
CRC Preset [C_PRES]=0xFFFF, Mask [C_MASK]=0xF0B8
Errors: CRC [CRCEC]=0, Aborts [ABTSC]=0, Discards [DISFC]=0
Nonmatch Addr Cntr [NMARC]=0
Retry Count [RETRC]=0
Max Frame Length [MFLR]=1608
Rx Int Threshold [RFTHR]=0, Frame Cnt [RFCNT]=0

User-defined Address 0000/0000/0000/0000
User-defined Address Mask 0x0000
buffer size 1524
PowerQUICC SCC specific errors:
0 input aborts on receiving flag sequence
0 throttles, 0 enables
0 overruns
0 transmitter underruns
0 transmitter CTS losts
0 aborted short frames
PoliceDept(config-if)# clock rate 128000
This command applies only to DCE interfaces
PoliceDept(config-if)#exit
PoliceDept(config)#
PoliceDept#
%SYS-5-CONFIG_I: Configured from console by console
PoliceDept#