You are on page 1of 4

CCNA Exploration: LAN Switching and Wireless Student Skills-based Assessment Lab

Topology Diagram

Addressing Table Device Interface
Fa0/1 F0/1.10 R1 F0/1.20 F0/1.30 F0/1.99 S1 S2 VLAN99 VLAN99

IP Address
N/A 172.17.10.1 172.17.20.1 172.17.30.1 172.17.99.1 172.17.99.11 172.17.99.12

Subnet Mask
N/A 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0

Default Gateway
N/A N/A N/A N/A N/A 172.17.99.1 172.17.99.1

All contents are Copyright © 1992–2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 1 of 4

except for the enable secret password.0 /24 172.1q Trunks (Native VLAN 99) VLAN 30 – Guest (Default) VLAN 10 – Faculty/Staff VLAN 20 – Students Network 172.0 255.255.17.0 255.0 /24 Switch 1 Ports Fa0/1 – 0/4 Fa0/5 Assignment 802.0 255.255.17.255.20.99.23 Subnet Mask 255.13 172.255.0 /24 172.17.20.99.255.10.0 /24 Switch 3 Ports Fa0/1 – 0/4 Assignment 802.17.17.17. All rights reserved. Use cisco for all passwords in this lab.20.10.17.1q Trunks (Native VLAN 99) Network 172.0 /24 172.30.CCNA Exploration LAN Switching and Wireless: Skills Based Assessment Student Skills Based Assessment Lab Device S3 PC1 PC2 PC3 Interface VLAN99 NIC NIC NIC IP Address 172.10.255.0 /24 All contents are Copyright © 1992–2009 Cisco Systems. which is class. Port Assignments Switch 2 Ports Fa0/1 – 0/4 Fa0/6 – 0/10 Fa0/11 – 0/17 Fa0/18 – 0/24 Assignment 802.17.1 Learning Objectives To complete this lab:         Cable a network according to the topology diagram Erase the startup configuration and reload a router to the default state Perform basic configuration tasks on a router Configure and activate interfaces Configure VTP servers and client Configure VLANs on the switches Configure STP Configure inter-VLAN routing Scenario This lab tests you on the skills and knowledge that you learned in Exploration 3.17.21 172.17.30.99.22 172. This document is Cisco Public Information.1q Trunks (Native VLAN 99) 802.30.1 172.17. Page 2 of 4 .17.17.0 /24 172.99. Inc.1q Trunks Network 172.0 Default Gateway 172.99.255.99.255.1 172.17.17.1 172.

with domain name and password. Inc. Step 3: Configure all trunks. S2. Configure the VLANs in the table below on the VTP server. Step 4: Re-enable the active user ports on S2 in access mode. and PC3 Ethernet interfaces. S2. This document is Cisco Public Information. Page 3 of 4 . All rights reserved. VLAN VLAN 99 VLAN 10 VLAN 20 VLAN 30 VLAN Name management faculty-staff students guest All contents are Copyright © 1992–2009 Cisco Systems. and S3. Configure a password for vty connections. Configure an EXEC mode password. Step 2: Configure the PC1. with domain name cisco and password cisco. and S3 switches according to the following guidelines:        Configure the hostname. Task 2: Perform Basic Device Configurations Configure the S1. Configure a password for console connections. Configure synchronous logging. Task 4: Configure VTP Step 1: Configure S1 as the VTP server. Step 2: Configure S2 and S3 as VTP clients. PC2. Configure a message-of-the-day banner. Disable DNS lookup. Step 2: Clear any existing configurations on the devices. Task 5: Configure VLANs Step 1: Configure the VLANs on the VTP server. Task 3: Configure and Activate Network Addresses Step 1: Configure the Management VLAN interface on S1.CCNA Exploration LAN Switching and Wireless: Skills Based Assessment Student Skills Based Assessment Lab Task 1: Prepare the Network Step 1: Cable a network that is similar to the one in the topology diagram. Step 3: Disable all ports using the shutdown command.

This document is Cisco Public Information.CCNA Exploration LAN Switching and Wireless: Skills Based Assessment Student Skills Based Assessment Lab Step 2: Verify that the VTP clients are receiving VLAN configurations from the server. Ping from each host to every other host. For PC hosts that are normally connected to other networks. Task 6: Configure STP Step 1: Configure S1 to always be root. Step 2: Configure RSTP. Step 2: Configure the trunking interface on R1. Task 8: Document the Configurations On each device. Task 7: Configure Inter-VLAN routing Step 1: Create a basic configuration on the router. Disconnect and store the cabling. All contents are Copyright © 1992–2009 Cisco Systems. Step 3: Verify Inter-VLAN routing. Page 4 of 4 . such as the school LAN or to the Internet. issue the show run command and capture the configurations. Task 9: Clean Up Erase the configurations and reload the routers. Inc. reconnect the appropriate cabling and restore the TCP/IP settings. All rights reserved. Step 3: Verify that STP is running correctly.