Chapter 3 Exam Switch V.

7
Question 1
1 / 1 pts

Refer to the exhibit. Which two statements are true about the switch CAT2? (Choose two.)

Eleven VLANs were manually configured on the switch.
Correct!

Six VLANs were either manually configured on the switch or learned via VTP.

Interfaces Fa0/13 and Fa0/14 are in VLAN 1.

Interfaces Fa0/13 and Fa0/14 are in an unspecified VLAN.

VLAN 100 is in dynamic desirable mode.

Correct!

VLAN 100 has no active access ports.

Refer to curriculum topic: 2.2.1

Question 2
1 / 1 pts

Refer to the exhibit. Switch1 and Switch2 are unable to establish an operational trunk
connection. What is the problem between the connection on Switch1 and Switch2?

encapsulation mismatch

switchport mode mismatch

MTU mismatch

VTP mismatch

DTP mismatch
Correct!

native VLAN mismatch

Refer to curriculum topic: 2.2.1

Question 3
1 / 1 pts
Which three effects does the interface command switchport host have when entered on a
switch? (Choose three.)
Correct!

sets the switch port mode to access

enables BPDU guard
Correct!

enables spanning tree PortFast

enables root guard
Correct!

disables channel grouping

enables BPDU filtering

Refer to curriculum topic: 2.2.1

Question 4
1 / 1 pts
When configuring an EtherChannel, given that one end of the link is configured with PAgP mode
desirable, which PAgP modes can be configured on the opposite end of the link in order to form
an active channel? (Choose two.)

off

on
Correct!

desirable
Correct!

auto

Refer to curriculum topic: 2.3.3

Question 5
1 / 1 pts
What is a best practice for VLAN design?
Correct!

Local VLANs should not extend beyond the distribution layer.

Place unused access ports in trunk mode and in a specific VLAN.

No more than three VLANs should be trunked to core layer switches.

VLANs should be designed in a hierarchical fashion with access VLANs at the access layer and
local server VLANs at the core layer.
Refer to curriculum topic: 2.1.3

Question 6
1 / 1 pts

Refer to the exhibit. Given the configuration information of the CAT1 and CAT2 switches, which
statement is true?
Correct!

LACP will form a channel between the switches.

Because the port-channel numbers do not match, LACP will not form a channel between the
switches.

Because the channel-group commands on SW2 should be set to "on," LACP will not form a
channel between the switches.

LACP will form a 200-Mb/s channel between the switches.

Question 7
1 / 1 pts

Refer to the exhibit. Which option correctly describes the function of a switch that is configured
in VTP transparent mode?

option 1

option 2

option 3
Correct!

option 4

option 5

Refer to curriculum topic: 2.2.3

Question 8
1 / 1 pts

Refer to the exhibit. Given that no VLANs have been deleted, what can be concluded about
interface Fa0/7?

It is not configured.

It is shutdown.

It has the default administrative mode.
Correct!

It is a trunk port.

Refer to curriculum topic: 2.2.2

Question 9
1 / 1 pts

Refer to the exhibit. Both SW1 and SW2 are configured with the PAgP desirable mode. Which
statement is true?

Both switches will initiate channeling negotiation and will not be able to form a channel.
Correct!

Both switches will initiate channeling negotiation and will form a channel between them.

Neither switch will initiate channeling negotiation and will not be able to form a channel between
them.

Neither switch will initiate channeling negotiation but will form a channel between them.
Refer to curriculum topic: 2.3.1

Question 10
1 / 1 pts

Refer to the exhibit. All switches in the VTP domain are new switches. Which switch or switches
will receive and maintain the list for all VLANs that are configured on the VTP server?

SW2
Correct!

SW4

SW3 and SW4

SW2, SW3, and SW4

Refer to curriculum topic: 2.2.3

Question 11
1 / 1 pts
Which two items are benefits of implementing local VLANs within the Enterprise Architecture?
(Choose two.)

A single VLAN can extend further than its associated distribution-layer switch.
Correct!

Failures at Layer 2 are isolated to a small subset of users.

High availability is made possible because local VLAN traffic on access switches can now be
passed directly to the core switches across an alternate Layer 3 path.

Layer 3 routing between VLANs can now be applied at the access layer.
Correct!

Local VLANs are limited to the access and distribution layer.

Refer to curriculum topic: 2.1.1

Question 12
1 / 1 pts
In the context of the Enterprise Composite Architecture, which statement is true about bestpractice design of local VLANs?

Local VLAN is a feature that has only local significance to the switch.
Correct!

Local VLANs do not extend beyond the building distribution layer.

Local VLANs should be created based upon the job function of the end user.

Local VLANs should be advertised to all switches in the network.

Question 13
1 / 1 pts
Which two VTP parameters must be identical on all switches in the network in order to
participate in the same VTP domain? (Choose two.)
Correct!

VTP domain name

VTP revision number
Correct!

VTP domain password

VTP server mode

VTP client mode

VTP transparent mode

Refer to curriculum topic: 2.2.3

Question 14
1 / 1 pts

Refer to the exhibit. What statement is true about the switch port?
Correct!

The port is not in trunking mode.

The port connects to a VoIP phone that has a PC attached.

The port can carry data from multiple VLANs if pruning is disabled.

The port will be disabled if the current device is unplugged and a second device is attached.

The port has manually been placed into trunking mode and is using the 802.1Q trunking
protocol.
Question 15
1 / 1 pts

Refer to the exhibit. What would be the result if a new switch with a default configuration is
inserted in the existing VTP domain Lab_Network?

The switch will operate as a VTP client.

The switch will operate in a VTP transparent mode.

The switch will operate as a VTP server and will delete the existing VLAN configuration in the
domain.
Correct!

The switch will operate as a VTP server but will not impact the existing VLAN configuration in
the domain.
Refer to curriculum topic: 2.2.3

Question 16
0 / 1 pts

Refer to the exhibit. What will happen when switch SW2 is added to the network?

Switch SW2 will change the VTP domain name to LAB1.

Switch SW2 will automatically change to VTP server mode.

Switch SW2 will delete all existing VLANs and introduce new VLANs in the VTP domain.
Correct Answer

Switch SW2 will drop all VTP advertisements and will not propagate them through the
VTP domain.--> Correct Answer
You Answered

Switch SW2 will include its own VLANs in the total number of VLANs configured in the VTP
domain.--> Bad
Refer to curriculum topic: 2.2.3

Question 17
1 / 1 pts
Which two statements are true about the 802.1Q trunking protocol? (Choose two.)
Correct!

Untagged frames will be placed in the configured native VLAN of a port.

It is a proprietary protocol that is supported on Cisco switches only.

Private VLAN configurations are not supported.
Correct!

The native VLAN interface configurations must match at both ends of the link or frames could be
dropped.
Question 18
1 / 1 pts

Refer to the exhibit. Switch SW2 was tested in a lab environment and later inserted into the
production network. Before the trunk link was connected between SW1 and SW2, the network
administrator issued the show vtp status command as displayed in the exhibit. Immediately
after the switches were interconnected, all users lost connectivity to the network. What could be
a possible reason for the problem?

Switch SW2 is in the wrong VTP operating mode.

The SW2 port G0/1 is in access mode by mistake.

Switch SW2 has the pruning eligible parameter enabled, which causes pruning of all VLANs.
Correct!

Switch SW2 has a higher VTP revision number, which causes deletion of the VLAN information
in the VTP domain.
Refer to curriculum topic: 2.2.4

Question 19
1 / 1 pts

Refer to the exhibit. How should SW2 be configured in order to participate in the same VTP
domain and populate the VLAN information across the domain?

Switch SW2 should be configured as a VTP client.

Switch SW2 should be configured for VTP version 1.

Switch SW2 should be configured with no VTP domain password.
Correct!

Switch SW2 should be configured as a VTP server with a higher revision number.

Refer to curriculum topic: 2.2.3

Question 20
1 / 1 pts
What are three characteristics of a VLAN access port? (Choose three.)
Correct!

A switch port can become an access port through static or dynamic configuration.
Correct!

An access port is associated with a single VLAN.

An access port should have the 802.1q encapsulation associated with it.

An access port created with the switchport mode access command will send DTP frames by
default.
Correct!

An access port is created with the switchport mode access command and then associated
with a VLAN with the switchport access vlan command.

The VLAN that the access port is assigned to will be automatically deleted if it does not exist in
the VLAN database of the switch.